TPS2813PW
| Parameters | |
|---|---|
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 14ns 15ns |
| Interface IC Type | NAND GATE BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.05 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 4V |
| Turn Off Time | 0.05 µs |
| Length | 4.4mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 520mW |
| Technology | BIMOS |
| Voltage - Supply | 4V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2813 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Power Supplies | 10V |
| Nominal Supply Current | 200nA |
| Power Dissipation | 520mW |
| Propagation Delay | 50 ns |
| Input Type | Inverting, Non-Inverting |
TPS2813PW Overview
The 8-TSSOP (0.173, 4.40mm Width) package provides greater flexibility.The packaging method is indicated by Tube.2 drivers are incorporated for its configuration.The device is mounted in the direction of Surface Mount.When the supply voltage is set to 4V~14V, it can demonstrate its superiority.The gate type on this device is N-Channel, P-Channel MOSFET.This device is allowed to operate in a temperature range of -40°C~125°C TA.Inverting, Non-Inverting is used as the input type.The configuration is based on 8 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number TPS2813.In this case, Surface Mount indicates how the device is mounted.When the device is designed, it has 8 pins.A voltage of 10V is required for its operation.The interface chip of the system is NAND GATE BASED MOSFET DRIVER.2A is the maximum output current.This subcategory of MOSFET Drivers has a number of useful electronic components.On the board, there are 8 component pins.Considering its maximum power dissipation, 520mW shows its maximum capacity to transfer and conduct power loss without overheating.Mosfet gate drivers solves the power supply problems for diverse applications based on Mosfet gate driverss power supplies of 10V.
TPS2813PW Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 520mW
TPS2813PW Applications
There are a lot of Texas Instruments TPS2813PW gate drivers applications.
- LCD/LCoS/DLP portable and embedded pico projectors
- Isolated Supplies for controller area network (CAN),
- UPS systems
- Motor Drives
- Isolated Supplies for Motor Control
- Portable Media Players
- Broadcast equipment
- Industrial Modules
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Motor Control
