TPS2813PWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 520mW |
| Technology | BIMOS |
| Voltage - Supply | 4V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2813 |
| Pin Count | 8 |
| Max Output Current | 2A |
| Power Supplies | 10V |
| Nominal Supply Current | 200nA |
| Power Dissipation | 520mW |
| Propagation Delay | 50 ns |
| Input Type | Inverting, Non-Inverting |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 14ns 15ns |
| Interface IC Type | NAND GATE BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.05 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 4V |
| Turn Off Time | 0.05 µs |
| Length | 4.4mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2813PWG4 Overview
There is greater flexibility with the 8-TSSOP (0.173, 4.40mm Width) package.The packaging method is indicated by Tube.This configuration includes 2 drivers.Its recommended mounting way is Surface Mount.WGate driversh a 4V~14V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.This gate type has a N-Channel, P-Channel MOSFET design.In this device, temperatures must not exceed -40°C~125°C TA.Inverting, Non-Inverting is used as its input type.Its configuration is based on a total of 8 terminations.There are various related parts under its base part number TPS2813.Mosfet driver is mounted using Surface Mount.A total of 8 pins are available on the device.A supply voltage of 10V is required for operation.Mosfet driver employs an interface chip called NAND GATE BASED MOSFET DRIVER as Mosfet drivers interface chip.In the maximum case, the output current can be limited to 2A.There are several useful electronic components in this subcategory of MOSFET Drivers.The component has 8 pins.According to its maximum power dissipation, 520mW is capable of conducting and transferring a large amount of power without overheating.With its power supplies of 10V, it solves the problems of power supply for a variety of applications.
TPS2813PWG4 Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 520mW
TPS2813PWG4 Applications
There are a lot of Texas Instruments TPS2813PWG4 gate drivers applications.
- Smart Phones
- Head-up and Head mounted displays
- High-speed communications
- Solar power supplies
- Dual-Battery Systems
- Industrial motor drives - compact, standard, premium, servo drives
- Refrigerator
- Isolated Gate Driver Supplies
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Portable computers
