TPS2814D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | BIMOS |
| Voltage - Supply | 4V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 10V |
| Base Part Number | TPS2814 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 2A |
| Power Supplies | 10V |
| Nominal Supply Current | 5mA |
| Power Dissipation | 730mW |
| Output Current | 2A |
| Max Supply Current | 200nA |
| Propagation Delay | 50 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 50 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Input Characteristics | SCHMITT TRIGGER |
| Rise / Fall Time (Typ) | 14ns 15ns |
| Interface IC Type | NAND GATE BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Turn On Time | 0.05 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 4V |
| Turn Off Time | 0.05 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2814D Overview
The 8-SOIC (0.154, 3.90mm Width) package offers greater flexibility.A packaging method of Tube is indicated.The device is mounted in the direction of Surface Mount.When the supply voltage is 4V~14V it is able to demonstrate its superiority.Gate type N-Channel, P-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -40°C~125°C TA.Mosfet driver uses Inverting, Non-Inverting as Mosfet drivers input type.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Many related parts can be found under its base part number TPS2814.The device is mounted with Surface Mount.Mosfet driver is configured wMosfet driverh 8 pins when designing.Mosfet driver is designed specifically to run on 10V volts of power.The interface chip of the system is NAND GATE BASED MOSFET DRIVER.There is a maximum output current of 2A.There are various useful electronic components in its subcategory MOSFET Drivers.The board has a total of 8 component pins.In terms of its basis, there are 2 outputs integrated.Mosfet driver supports an output current of 2A.730mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.To ensure high stability, the supply current should be kept at 200nA.Due to its power supplies of 10V, it solves the power supply problem for a wide range of applications.Its input is characterized by the value SCHMITT TRIGGER.
TPS2814D Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TPS2814D Applications
There are a lot of Texas Instruments TPS2814D gate drivers applications.
- Industrial Motor Inverter - Power Tools, Robotics
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Automotive Applications
- Pulse transformer drivers
- Isolated switch mode power supplies (SMPS)
- Motor Controls
- Motor Control
- Uninterruptible Power Supplies (UPS)
- Solar power supplies
- Motor controllers
