TPS2814DRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | BIMOS |
| Voltage - Supply | 4V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 10V |
| Base Part Number | TPS2814 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 2A |
| Power Supplies | 10V |
| Nominal Supply Current | 200nA |
| Power Dissipation | 730mW |
| Output Current | 2A |
| Propagation Delay | 50 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 50 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Input Characteristics | SCHMITT TRIGGER |
| Rise / Fall Time (Typ) | 14ns 15ns |
| Interface IC Type | NAND GATE BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Turn On Time | 0.05 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 4V |
| Turn Off Time | 0.05 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2814DRG4 Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.A packaging method of Tape & Reel (TR) is indicated.Gate drivers is mounted in the way of Surface Mount.When the supply voltage is set to 4V~14V, it can demonstrate its superiority.Gate drivers is designed wGate driversh a N-Channel, P-Channel MOSFET gate.Mosfet driver is possible to use this device at temperatures as low as -40°C~125°C TA.Inverting, Non-Inverting is used as the input type in this program.8 terminations constitute its foundation.Numerous related parts are available for its base part number TPS2814.In this case, Surface Mount indicates how the device is to be mounted.Mosfet driver is configured wMosfet driverh 8 pins when designing.The device is specifically designed to operate at 10V volts.The interface IC is referred to as NAND GATE BASED MOSFET DRIVER.Mosfet driver is possible for the output current to be as low as 2A.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.The board has 8 component pins.Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.This device supports a current output of 2A at the output.Based on the maximum power dissipation of 730mW, it is clear that it is capable of transferring and conducting power losses without becoming overheated.With its 10V power supply, it provides power for diverse applications.SCHMITT TRIGGER is its input.
TPS2814DRG4 Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TPS2814DRG4 Applications
There are a lot of Texas Instruments TPS2814DRG4 gate drivers applications.
- DC/DC converters
- High-voltage isolated DC-DC converters
- High-speed communications
- 3-Phase Motor Inverter Driver
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Isolated Gate Driver Supplies
- Isolated switch mode power supplies (SMPS)
- Portable Media Players
- Solar power supplies
- RGB applications
