banner_page

TPS2814P

Through Hole Tube Active EAR99 Gate Drivers ICs Inverting, Non-Inverting 8-DIP (0.300, 7.62mm) TPS2814 Low-Side


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS2814P
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: -
  • Stock: 848
  • Description: Through Hole Tube Active EAR99 Gate Drivers ICs Inverting, Non-Inverting 8-DIP (0.300, 7.62mm) TPS2814 Low-Side (Kg)

Details

Tags

Parameters
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory MOSFET Drivers
Max Power Dissipation 1.09W
Technology BIMOS
Voltage - Supply 4V~14V
Terminal Position DUAL
Number of Functions 2
Supply Voltage 10V
Base Part Number TPS2814
Pin Count 8
Number of Outputs 2
Output Voltage 11.5V
Max Output Current 2A
Power Supplies 10V
Nominal Supply Current 5mA
Power Dissipation 1.09W
Output Current 2A
Propagation Delay 50 ns
Input Type Inverting, Non-Inverting
Turn On Delay Time 50 ns
Output Characteristics TOTEM-POLE
Rise Time 35ns
Fall Time (Typ) 35 ns
Input Characteristics SCHMITT TRIGGER
Rise / Fall Time (Typ) 14ns 15ns
Interface IC Type NAND GATE BASED MOSFET DRIVER
Channel Type Synchronous
Turn On Time 0.05 µs
Output Peak Current Limit-Nom 2A
Driven Configuration Low-Side
Gate Type N-Channel, P-Channel MOSFET
Current - Peak Output (Source, Sink) 2A 2A
High Side Driver YES
Logic Voltage - VIL, VIH 1V 4V
Turn Off Time 0.05 µs
Height 5.08mm
Length 9.81mm
Width 6.35mm
Thickness 3.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Number of Pins 8
Weight 440.409842mg
Operating Temperature -40°C~125°C TA
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)

TPS2814P Overview


The 8-DIP (0.300, 7.62mm) package offers greater flexibility.Tube represents the package.It's mounted on the way to Through Hole.A supply voltage of 4V~14V demonstrates its superiority.Gate type N-Channel, P-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -40°C~125°C TA.Mosfet driver accepts input of type Inverting, Non-Inverting.8 terminations constitute its foundation.Mosfet driver is possible to find various related parts under Mosfet drivers base part number TPS2814.You mount it with Through Hole.A total of 8 pins are available on the device.A supply voltage of 10V is required for operation.The interface IC of the device is NAND GATE BASED MOSFET DRIVER.2A is the maximum output current.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.There are 8 component pins on the board.Based on its basis, it integrates 2 outputs.2A is the maximum output current supported by the device.Having the maximum power dissipation of 1.09W indicates its maximum capacity to conduct power losses without overheating.Mosfet gate drivers solves the power supply problems for diverse applications based on Mosfet gate driverss power supplies of 10V.The voltage it outputs is 11.5V.There is a SCHMITT TRIGGER value associated with its input.

TPS2814P Features


Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 1.09W

TPS2814P Applications


There are a lot of Texas Instruments TPS2814P gate drivers applications.

  • Motor Drives
  • High-voltage isolated DC-DC converters
  • Dual-Battery Systems
  • Head-up and Head mounted displays
  • AC-DC Inverters
  • Isolated switch mode power supplies (SMPS)
  • Solar power supplies
  • Motor controllers
  • DC-DC Converters
  • High frequency line drivers

Write a review

Note: HTML is not translated!
    Bad           Good