TPS2814PWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 520mW |
| Technology | BIMOS |
| Voltage - Supply | 4V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2814 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 2A |
| Power Supplies | 10V |
| Nominal Supply Current | 200nA |
| Power Dissipation | 520mW |
| Output Current | 2A |
| Propagation Delay | 50 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 14ns 15ns |
| Interface IC Type | NAND GATE BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Turn On Time | 0.05 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 4V |
| Turn Off Time | 0.05 µs |
| Length | 4.4mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2814PWRG4 Overview
Its 8-TSSOP (0.173, 4.40mm Width) package is adopted for higher flexibility.Gate drivers is packaged in the way of Tape & Reel (TR).Surface Mount is mounted in the way of the device.When the supply voltage is 4V~14V it is able to demonstrate its superiority.A gate type of N-Channel, P-Channel MOSFET is used in its design.Temperature range -40°C~125°C TA is allowed for this device.Inverting, Non-Inverting is used as the input type in this program.Its configuration starts with 8 terminations.Under its base part number TPS2814, various related parts can be found.Surface Mount is the way it takes to mount the device.There are 8 pins available in the device.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 10V.As its interface IC, NAND GATE BASED MOSFET DRIVER is being employed.An output current as high as 2A can be achieved at maximum power.There are several useful electronic components in this subcategory of MOSFET Drivers.A board with 8 component pins is available.Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.Mosfet driver supports an output current of 2A.Based on the maximum power dissipation of 520mW, it is clear that it is capable of transferring and conducting power losses without becoming overheated.The power supply of 10V is able to solve the power supply problems for a wide variety of applications.
TPS2814PWRG4 Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 520mW
TPS2814PWRG4 Applications
There are a lot of Texas Instruments TPS2814PWRG4 gate drivers applications.
- White Goods - Air Conditioner, Washing Machine,
- High current laser/LED systems
- Topologies
- Commercial air-conditioning (CAC)
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Automotive Applications
- Power factor correction (PFC) circuits
- Isolated Supplies for controller area network (CAN),
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Isolated Gate Driver Supplies
