TPS2815D
| Parameters | |
|---|---|
| Logic Voltage - VIL, VIH | 1V 4V |
| Turn Off Time | 0.05 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | BIMOS |
| Voltage - Supply | 4V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 10V |
| Base Part Number | TPS2815 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 11.5V |
| Max Output Current | 2A |
| Power Supplies | 10V |
| Nominal Supply Current | 5mA |
| Power Dissipation | 730mW |
| Output Current | 2A |
| Propagation Delay | 50 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Input Characteristics | SCHMITT TRIGGER |
| Rise / Fall Time (Typ) | 14ns 15ns |
| Interface IC Type | NAND GATE BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Turn On Time | 0.05 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
TPS2815D Overview
Its 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.A packaging method of Tube is used.Surface Mount is mounted in the way of the device.WGate driversh a 4V~14V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.This device is designed with a N-Channel, P-Channel MOSFET gate type.There is a temperature range for this device of -40°C~125°C TA.Mosfet driver accepts input of type Inverting.Its configuration is based on a total of 8 terminations.The base part number TPS2815 refers to a number of related parts.In this case, Surface Mount indicates how the device is to be mounted.During design, it is configured with 8 pins.In addition, it is specifically designed to operate with a supply voltage of 10V.NAND GATE BASED MOSFET DRIVER is employed as its interface IC.There is a maximum output current of 2A that can be achieved.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.The board has a total of 8 component pins.The basis of this model has 2 outputs integrated.Mosfet driver supports an output current of 2A.Considering its maximum power dissipation, 730mW shows its maximum capacity to transfer and conduct power loss without overheating.With its power supplies of 10V, it solves the power supply problems for diverse applications.Mosfet gate drivers outputs 11.5V as voltage.The input of this function is characterised by SCHMITT TRIGGER.
TPS2815D Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TPS2815D Applications
There are a lot of Texas Instruments TPS2815D gate drivers applications.
- serial peripheral interface (SPI), I2C
- Head-up and Head mounted displays
- Portable Media Players
- Motor Control
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Refrigerator
- Commercial and agricultural vehicles (CAV)
- Isolated Supplies for controller area network (CAN),
- Portable computers
- DC-DC Converters
