TPS2815DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | BIMOS |
| Voltage - Supply | 4V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 10V |
| Base Part Number | TPS2815 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 2A |
| Power Supplies | 10V |
| Nominal Supply Current | 200nA |
| Power Dissipation | 730mW |
| Output Current | 2A |
| Propagation Delay | 50 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Input Characteristics | SCHMITT TRIGGER |
| Rise / Fall Time (Typ) | 14ns 15ns |
| Interface IC Type | NAND GATE BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Turn On Time | 0.05 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 4V |
| Turn Off Time | 0.05 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2815DR Overview
Its 8-SOIC (0.154, 3.90mm Width) package is adopted for higher flexibility.Tape & Reel (TR) is the form of the package.Ideally, it should be mounted in the direction of Surface Mount.In the absence of a power supply voltage of 4V~14V V, it is able to demonstrate its superiority.A gate type of N-Channel, P-Channel MOSFET is used in its design.This device can operate at temperatures up to -40°C~125°C TA.Inverting is used as its input type.Its configuration is based on a total of 8 terminations.Many related parts can be found under its base part number TPS2815.Mosfet driver is mounted using Surface Mount.At the time of design, it is configured with 8 pins.In order to operate, a voltage of 10V has to be applied.There is an interface IC called NAND GATE BASED MOSFET DRIVER that is employed in this device.In the maximum case, the output current can be 2A volts.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.8 pins are present on the component.For its basis, 2 outputs are integrated.The output current of this device can be set to 2A.The maximum power dissipation of 730mW shows its maximum capability to transfer and conduct power loss without overheating.With its power supplies of 10V, it solves the power supply problems for diverse applications.Its input is characterized by SCHMITT TRIGGER.
TPS2815DR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TPS2815DR Applications
There are a lot of Texas Instruments TPS2815DR gate drivers applications.
- Smart Phones
- 3-Phase Motor Inverter Driver
- Power factor correction (PFC) circuits
- Motor Drives
- Line drivers
- High-speed communications
- RGB applications
- Motor Control
- High power buffers
- Portable Navigation Devices
