TPS2815P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.09W |
| Technology | BIMOS |
| Voltage - Supply | 4V~14V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 10V |
| Base Part Number | TPS2815 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 2A |
| Power Supplies | 10V |
| Nominal Supply Current | 5mA |
| Power Dissipation | 1.09W |
| Output Current | 2A |
| Propagation Delay | 50 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Input Characteristics | SCHMITT TRIGGER |
| Rise / Fall Time (Typ) | 14ns 15ns |
| Interface IC Type | NAND GATE BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Turn On Time | 0.05 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 4V |
| Turn Off Time | 0.05 µs |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2815P Overview
For greater flexibility, its 8-DIP (0.300, 7.62mm) package is used.Gate drivers is package in Tube case.Through Hole is mounted in the way.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4V~14V.A gate type of N-Channel, P-Channel MOSFET is used in its design.The allowable temperature range that this device can be operated in is -40°C~125°C TA.Input type of Inverting is used.8 terminations constitute its foundation.Many related parts can be found under its base part number TPS2815.Mosfet driver is mounted using Through Hole.When designing, the device is configured with 8 pins.In addition, it is specifically designed to operate with a supply voltage of 10V.NAND GATE BASED MOSFET DRIVER is employed as its interface IC.As a maximum, there is 2A limit to the output current.Its subcategory of MOSFET Drivers contains various useful electronic components.The board has 8 component pins.Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.Mosfet gate drivers supports a current output of 2A.Using 1.09W as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.With its power supplies of 10V, it solves the power supply problems for diverse applications.A SCHMITT TRIGGER character describes its input.
TPS2815P Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 1.09W
TPS2815P Applications
There are a lot of Texas Instruments TPS2815P gate drivers applications.
- Smart Phones
- Motor Controls
- DC-DC Converters
- Portable Navigation Devices
- Industrial Power Supplies
- Industrial motor drives - compact, standard, premium, servo drives
- Active Clamp Flyback or Forward and Synchronous Rectifier
- High-voltage isolated DC-DC converters
- Isolated Supplies for Motor Control
- Motor controllers
