TPS2815PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 520mW |
| Technology | BIMOS |
| Voltage - Supply | 4V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2815 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 2mA |
| Power Supplies | 10V |
| Nominal Supply Current | 200nA |
| Power Dissipation | 520mW |
| Output Current | 2A |
| Propagation Delay | 50 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Input Characteristics | GATED SCHMITT TRIGGER |
| Rise / Fall Time (Typ) | 14ns 15ns |
| Interface IC Type | NAND GATE BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Turn On Time | 0.05 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 4V |
| Turn Off Time | 0.05 µs |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2815PWR Overview
The 8-TSSOP (0.173, 4.40mm Width) package offers greater flexibility.Tape & Reel (TR) represents the package.Ideally, it should be mounted in the direction of Surface Mount.In the absence of a power supply voltage of 4V~14V V, it is able to demonstrate its superiority.There is a gate type of N-Channel, P-Channel MOSFET in this design.The allowable temperature range that this device can be operated in is -40°C~125°C TA.The input type is Inverting.Its configuration is based on a total of 8 terminations.You will find various related parts under the base part number TPS2815.Mounting the device requires Surface Mount.At the time of design, it is configured with 8 pins.The device is specifically designed to function with a supply voltage of 10V V.The interface chip of the system is NAND GATE BASED MOSFET DRIVER.Mosfet driver is possible to achieve a maximum output current of 2mA.There are various useful electronic components in its subcategory MOSFET Drivers.The component has 8 pins.Based on its basis, it integrates 2 outputs.The device is capable of delivering a current of 2A.Its maximum power dissipation of 520mW shows its power loss capacity without overheating.With its 10V power supply, it provides power for diverse applications.This function has an input of GATED SCHMITT TRIGGER.
TPS2815PWR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 520mW
TPS2815PWR Applications
There are a lot of Texas Instruments TPS2815PWR gate drivers applications.
- Solar power supplies
- Motor controllers
- Motor Control
- Commercial air-conditioning (CAC)
- High power buffers
- PCMCIA applications
- serial peripheral interface (SPI), I2C
- Portable Navigation Devices
- White Goods - Air Conditioner, Washing Machine,
- Solar inverters
