TPS2817DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 13.012431mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 437mW |
| Technology | BICMOS |
| Voltage - Supply | 4V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Base Part Number | TPS2817 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Voltage | 15.5V |
| Max Output Current | 2A |
| Operating Supply Voltage | 10V |
| Nominal Supply Current | 650μA |
| Power Dissipation | 437mW |
| Output Current | 2A |
| Propagation Delay | 50 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ns |
| Max Output Voltage | 13V |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 14ns 14ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Output Peak Current Limit-Nom | 2A |
| Supply Voltage1-Nom | 10V |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 4V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2817DBVT Overview
For greater flexibility, its SC-74A, SOT-753 package is used.Tape & Reel (TR) represents the package.Ideally, it should be mounted in the direction of Surface Mount.When the supply voltage is set to 4V~14V, it can demonstrate its superiority.This device is designed with a N-Channel MOSFET gate type.There is a temperature range for this device of -40°C~125°C TA.Mosfet driver accepts input of type Non-Inverting.It's configured with 5 terminations.Under its base part number TPS2817, various related parts can be found.Mounting the device requires Surface Mount.At the time of design, it is configured with 5 pins.Mosfet driver is designed specifically to run on 10V volts of power.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.In the maximum case, the output current can be 2A volts.Within this subcategory of MOSFET Drivers, there are several useful electronic components.Components with 5 pins are available.The basis has 1 integrated outputs.The output current of this device can be set to 2A.Considering its maximum power dissipation, 437mW shows its maximum capacity to transfer and conduct power loss without overheating.A voltage of 15.5V is output by this device.Mosfet gate drivers is recommended that the operating voltage of the supply be set at 10V.In general, it is recommended to keep the maximum output voltage at 13V.
TPS2817DBVT Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
5 pins
Maximum power dissipation of 437mW
TPS2817DBVT Applications
There are a lot of Texas Instruments TPS2817DBVT gate drivers applications.
- Isolated switch mode power supplies (SMPS)
- RGB applications
- Uninterruptible Power Supplies (UPS)
- Commercial air-conditioning (CAC)
- Refrigerator
- Isolated Supplies for Motor Control
- A/D drivers
- Portable Navigation Devices
- Broadcast equipment
- Portable computers
