TPS2818MDBVREPG4
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 437mW |
| Technology | BICMOS |
| Voltage - Supply | 4V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2818 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Max Output Current | 2A |
| Power Dissipation | 437mW |
| Output Current | 2A |
| Max Supply Current | 20mA |
| Propagation Delay | 50 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Output Polarity | INVERTED |
| Rise / Fall Time (Typ) | 14ns 14ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Output Peak Current Limit-Nom | 2A |
| Supply Voltage1-Nom | 10V |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1V 4V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
TPS2818MDBVREPG4 Overview
A higher level of flexibility is provided by its SC-74A, SOT-753 package.There is a package in the form of Tape & Reel (TR).Gate drivers is mounted in the way of Surface Mount.By using 4V~14V supply voltage, it is able to demonstrate its superiority.This device is designed with a N-Channel MOSFET gate type.-55°C~125°C TA is the allowed temperature range for this device.Mosfet driver uses Inverting as Mosfet drivers input type.The configuration is based on 5 terminations.Under its base part number TPS2818, various related parts can be found.Surface Mount is the way it takes to mount the device.As a result, it is configured with 5 pins when it is designed.Mosfet driver is designed specifically to run on 5V volts of power.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.In the maximum case, the output current can be 2A volts.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The board has a total of 5 component pins.Based on its basis, it integrates 1 outputs.This device is capable of delivering 2A current.This device has a maximum power dissipation of 437mW, indicating that it is capable of reducing power loss without overheating.To maintain higher stability, the supply current should always be 20mA.
TPS2818MDBVREPG4 Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
5 pins
Maximum power dissipation of 437mW
TPS2818MDBVREPG4 Applications
There are a lot of Texas Instruments TPS2818MDBVREPG4 gate drivers applications.
- Isolated switch mode power supplies (SMPS)
- White Goods - Air Conditioner, Washing Machine,
- Motor Controls
- Isolated Supplies for controller area network (CAN),
- Industrial Modules
- Isolated Gate Driver Supplies
- 3-Phase Motor Inverter Driver
- DC/DC converters
- Power factor correction (PFC) circuits
- Pulse transformer drivers
