Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Number of Pins |
5 |
Weight |
13.012431mg |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
BUILT-IN REGULATOR 8V TO 40V SUPPLY |
Subcategory |
MOSFET Drivers |
Max Power Dissipation |
437mW |
Technology |
BICMOS |
Voltage - Supply |
4V~14V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
10V |
Base Part Number |
TPS2819 |
Pin Count |
5 |
Number of Outputs |
1 |
Max Output Current |
2A |
Operating Supply Current |
50mA |
Power Dissipation |
437mW |
Output Current |
2A |
Propagation Delay |
50 ns |
Input Type |
Non-Inverting |
Turn On Delay Time |
50 ns |
Output Characteristics |
TOTEM-POLE |
Rise Time |
35ns |
Fall Time (Typ) |
35 ns |
Output Polarity |
TRUE |
Rise / Fall Time (Typ) |
14ns 14ns |
Interface IC Type |
BUFFER OR INVERTER BASED MOSFET DRIVER |
Channel Type |
Single |
Output Peak Current Limit-Nom |
2A |
Supply Voltage1-Nom |
10V |
Driven Configuration |
Low-Side |
Gate Type |
N-Channel MOSFET |
Current - Peak Output (Source, Sink) |
2A 2A |
High Side Driver |
YES |
Logic Voltage - VIL, VIH |
1V 4V |
Height |
1.45mm |
Length |
2.9mm |
Width |
1.6mm |
Thickness |
1.2mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2819DBVR Overview
A higher degree of flexibility is achieved by adopting its SC-74A, SOT-753 package.There is a package in the form of Tape & Reel (TR).It's mounted on the way to Surface Mount.When the supply voltage is set to 4V~14V, it can demonstrate its superiority.There is a gate type of N-Channel MOSFET in this design.-40°C~125°C TA is the allowed temperature range for this device.A type of Non-Inverting is used for input in this program.Its configuration is based on a total of 5 terminations.You will find various related parts under the base part number TPS2819.Surface Mount is the way it takes to mount the device.A total of 5 pins are available on the device.In order to operate, a voltage of 10V has to be applied.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.In the maximum case, the output current can be 2A volts.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The number of component pins is 5.The basis of the model has 1 outputs integrated.The output current supported by the device is 2A.Using 437mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.With a voltage of 50mA, it operates with a constant current.In addition, technology that is unique can be used to provide BUILT-IN REGULATOR 8V TO 40V SUPPLY.
TPS2819DBVR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
5 pins
Maximum power dissipation of 437mW
BUILT-IN REGULATOR 8V TO 40V SUPPLY
TPS2819DBVR Applications
There are a lot of Texas Instruments TPS2819DBVR gate drivers applications.
- Digitally controlled power supplies
- Dual-Battery Systems
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Portable computers
- Industrial Power Supplies
- Topologies
- Isolated Gate Driver Supplies
- High-voltage isolated DC-DC converters
- Motor controllers
- Line drivers