TPS2819DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 13.012431mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 437mW |
| Technology | BICMOS |
| Voltage - Supply | 4V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Base Part Number | TPS2819 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Voltage | 15.5V |
| Max Output Current | 2A |
| Operating Supply Voltage | 10V |
| Nominal Supply Current | 25μA |
| Power Dissipation | 437mW |
| Output Current | 2A |
| Propagation Delay | 50 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ns |
| Max Output Voltage | 13V |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 14ns |
| Fall Time (Typ) | 35 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 14ns 14ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Output Peak Current Limit-Nom | 2A |
| Supply Voltage1-Nom | 10V |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 4V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2819DBVT Overview
The SC-74A, SOT-753 package offers greater flexibility.A packaging method of Tape & Reel (TR) is used.Ideally, it should be mounted in the direction of Surface Mount.Using a 4V~14V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.The gate type on this device is N-Channel MOSFET.This device is allowed to operate in a temperature range of -40°C~125°C TA.A type of Non-Inverting is used for input in this program.There are 5 terminations to form the base of its configuration.Many related parts can be found under its base part number TPS2819.In this case, Surface Mount indicates how the device is to be mounted.During design, it is configured with 5 pins.A supply voltage of 10V is required for operation.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.Mosfet driver is possible to achieve a maximum output current of 2A.Within this subcategory of MOSFET Drivers, there are several useful electronic components.A board with 5 component pins is available.There are 1 outputs integrated for its basis.The output current can be set to 2A.437mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.As a result, a voltage of 15.5V is produced.Setting the operating supply voltage to 10V is recommended.In order to maintain the maximum output voltage, it must be set at 13V.
TPS2819DBVT Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
5 pins
Maximum power dissipation of 437mW
TPS2819DBVT Applications
There are a lot of Texas Instruments TPS2819DBVT gate drivers applications.
- White Goods - Air Conditioner, Washing Machine,
- Line drivers
- Multicolor LED/laser displays
- Solar power supplies
- Isolated Gate Driver Supplies
- Portable Navigation Devices
- Industrial Motor Inverter - Power Tools, Robotics
- Welding
- 3-Phase Motor Inverter Driver
- Telecom switch mode power supplies
