TPS2819MDBVREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 13.012431mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 437mW |
| Technology | BICMOS |
| Voltage - Supply | 4V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2819 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Max Output Current | 2A |
| Nominal Supply Current | 650μA |
| Power Dissipation | 437mW |
| Output Current | 2A |
| Max Supply Current | 20mA |
| Propagation Delay | 50 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 14ns 14ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Output Peak Current Limit-Nom | 2A |
| Supply Voltage1-Nom | 10V |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1V 4V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
TPS2819MDBVREP Overview
Its SC-74A, SOT-753 package provides greater flexibility.A packaging method of Tape & Reel (TR) is indicated.Surface Mount is mounted in the way.By using 4V~14V supply voltage, it is able to demonstrate its superiority.There is a gate type of N-Channel MOSFET in this design.For this device, the temperature range is -55°C~125°C TA.Mosfet driver uses Non-Inverting as Mosfet drivers input type.The configuration is based on 5 terminations.There are numerous related parts listed under its base part number TPS2819.In this case, Surface Mount indicates how the device is mounted.During design, it is configured with 5 pins.The device is specifically designed to operate at 5V volts.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.An output current as high as 2A can be achieved at maximum power.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.A total of 5 pins are available for component connections.Based on its basis, it integrates 1 outputs.Mosfet gate drivers can deliver a current of 2A.437mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.The supply current should be kept at 20mA to ensure higher stability.
TPS2819MDBVREP Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
5 pins
Maximum power dissipation of 437mW
TPS2819MDBVREP Applications
There are a lot of Texas Instruments TPS2819MDBVREP gate drivers applications.
- serial peripheral interface (SPI), I2C
- Digitally controlled power supplies
- High power buffers
- Head-up and Head mounted displays
- Portable Media Players
- LCD/LCoS/DLP portable and embedded pico projectors
- Solar inverters
- Power factor correction (PFC) circuits
- Uninterruptible Power Supplies (UPS)
- General Purpose 3-Phase Inverter
