TPS28225DRBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Weight | 24.012046mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 2.58W |
| Voltage - Supply | 4.5V~8.8V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 7.2V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS28225 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 4A |
| Operating Supply Voltage | 7.2V |
| Element Configuration | Single |
| Nominal Supply Current | 500μA |
| Power Dissipation | 2.58W |
| Output Current | 6A |
| Propagation Delay | 14 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 14 ns |
| Rise Time | 10ns |
| Fall Time (Typ) | 10 ns |
| Rise / Fall Time (Typ) | 10ns 10ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Output Peak Current Limit-Nom | 6A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| High Side Voltage - Max (Bootstrap) | 33V |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS28225DRBR Overview
For greater flexibility, its 8-VDFN Exposed Pad package is used.Tape & Reel (TR) is the packaging method.Surface Mount is mounted in the way.In the absence of a 4.5V~8.8V supply voltage, it can demonstrate its superiority.Gate type N-Channel MOSFET has been used in its design.There is a temperature range for this device of -40°C~125°C TJ.Input type of Non-Inverting is used.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Mosfet driver contains a variety of related parts under Mosfet drivers base part number TPS28225.The mount method is Surface Mount.There are 8 pins available in the device.A supply voltage of 7.2V is required for operation.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.There is an output current limit of 4A for this device.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The board has 8 component pins.Mosfet driver is possible to set the high-side voltage - Max (Bootstrap) to 33V.There are 2 outputs integrated for its basis.An output current of 6A is supported.According to its maximum power dissipation, 2.58W is capable of conducting and transferring a large amount of power without overheating.In order to operate properly, the operating supply voltage should be set to 7.2V.
TPS28225DRBR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 33V
Maximum power dissipation of 2.58W
TPS28225DRBR Applications
There are a lot of Texas Instruments TPS28225DRBR gate drivers applications.
- Commercial and agricultural vehicles (CAV)
- Industrial Motor Inverter - Power Tools, Robotics
- PCMCIA applications
- Portable Navigation Devices
- Motor Controls
- Power factor correction (PFC) circuits
- Isolated Supplies for controller area network (CAN),
- Motor controllers
- Telecom switch mode power supplies
- High-voltage isolated DC-DC converters
