TPS28225DRBTG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Weight | 24.012046mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | MOSFET Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 7.2V |
| Terminal Pitch | 0.65mm |
| Pin Count | 8 |
| Max Output Current | 4A |
| Operating Supply Voltage | 7.2V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 8V |
| Min Supply Voltage | 4.5V |
| Power Dissipation-Max | 2.58W |
| Element Configuration | Single |
| Nominal Supply Current | 500μA |
| Power Dissipation | 2.58W |
| Current - Output | 6A |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 14 ns |
| Rise Time | 10ns |
| Fall Time (Typ) | 10 ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Number of Drivers | 2 |
| High Side Driver | YES |
| Height | 880μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TPS28225DRBTG4 Overview
Gate drivers provides greater flexibilGate driversy to use the SOIC package.A packaging method of Tape and Reel is indicated.A total of 2 drivers are integrated into its configuration.Mosfet driver is based on 8 terminations.Mosfet driver is mounted using Surface Mount.The pins are configured with 8 when designing the chip.A voltage of 7.2V is required for its operation.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be 4A volts.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The component has 8 pins.125°C is the maximum acceptable operating temperature.There is a minimum operating temperature of -40°C.This device operates at its maximum voltage of 8V.In order for it to operate, the supply voltage of 4.5V must be maintained.Mosfet gate drivers outputs a current of 6A at the moment.As a rule of thumb, the operating supply voltage should be set to 7.2V.
TPS28225DRBTG4 Features
Embedded in the Tape and Reel package
2 drivers
8 pins
TPS28225DRBTG4 Applications
There are a lot of Texas Instruments TPS28225DRBTG4 gate drivers applications.
- Isolated Supplies for controller area network (CAN),
- Solar power supplies
- White Goods - Air Conditioner, Washing Machine,
- Motor controllers
- Commercial air-conditioning (CAC)
- Line drivers
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Motor Drives
- Power factor correction (PFC) circuits
- Isolated switch mode power supplies (SMPS)
