TPS28225TDRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Voltage - Supply | 4.5V~8.8V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 7.2V |
| Base Part Number | TPS28225 |
| Pin Count | 8 |
| Max Output Current | 2A |
| Number of Channels | 1 |
| Input Type | Non-Inverting |
| Rise / Fall Time (Typ) | 10ns 10ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.1V |
| High Side Voltage - Max (Bootstrap) | 33V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS28225TDRQ1 Overview
There is greater flexibility with the 8-SOIC (0.154, 3.90mm Width) package.There is a package in the form of Tape & Reel (TR).Configuration is based on 2 drivers.Surface Mount is mounted in the way of the device.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~8.8V supply voltage.There is a gate type of N-Channel MOSFET in this design.This device can operate at temperatures up to -40°C~125°C TJ.A type of Non-Inverting is used for input in this program.Its configuration starts with 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number TPS28225.Surface Mount is the way it takes to mount the device.At the time of design, it is configured with 8 pins.A supply voltage of 7.2V is required for operation.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.There is an output current limit of 2A for this device.The board has 8 component pins.Max (Bootstrap) can be as high as 33V.A gate driver in the Automotive, AEC-Q100 series is included in this document.The device is configured to operate on 1 channels.
TPS28225TDRQ1 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 33V
Operating with the supply voltage of Automotive, AEC-Q100
TPS28225TDRQ1 Applications
There are a lot of Texas Instruments TPS28225TDRQ1 gate drivers applications.
- Broadcast equipment
- Isolated switch mode power supplies (SMPS)
- Welding
- High-voltage isolated DC-DC converters
- Industrial Power Supplies
- Active filtering
- DC-DC Converters
- Industrial Modules
- RGB applications
- serial peripheral interface (SPI), I2C
