TPS28226DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.25W |
| Voltage - Supply | 6.8V~8.8V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 7.2V |
| Frequency | 2MHz |
| Base Part Number | TPS28226 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 4A |
| Operating Supply Voltage | 7.2V |
| Element Configuration | Single |
| Power Dissipation | 1.25W |
| Output Current | 6A |
| Input Type | Non-Inverting |
| Rise Time | 10ns |
| Fall Time (Typ) | 10 ns |
| Turn-Off Delay Time | 14 ns |
| Rise / Fall Time (Typ) | 10ns 10ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Output Peak Current Limit-Nom | 6A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| High Side Driver | YES |
| High Side Voltage - Max (Bootstrap) | 33V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS28226DR Overview
For greater flexibility, the 8-SOIC (0.154, 3.90mm Width) package is adopted.Tape & Reel (TR) represents the package.Surface Mount is the way in which it is mounted.In the absence of a power supply voltage of 6.8V~8.8V V, it is able to demonstrate its superiority.There is a gate type of N-Channel MOSFET in this design.There is a temperature range for this device of -40°C~125°C TJ.Non-Inverting is used as the input type.Its configuration starts with 8 terminations.You will find various related parts under the base part number TPS28226.Mosfet driver is mounted using Surface Mount.There are 8 pins available in the device.In order to operate, a voltage of 7.2V has to be applied.The interface IC of the device is BUFFER OR INVERTER BASED MOSFET DRIVER.An output current as high as 4A can be achieved at maximum power.This subcategory of MOSFET Drivers has a number of useful electronic components.The board contains 8 pins for component connections.There can be a voltage up to 33V on the high-side (Bootstrap).For its basis, there are 2 outputs integrated.The output current of this device can be set to 6A.Considering its maximum power dissipation, 1.25W shows its maximum capacity to transfer and conduct power loss without overheating.Mosfet gate drivers is recommended that the operating voltage of the supply be set at 7.2V.The frequency of 2MHz can improve efficiency.
TPS28226DR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 33V
Maximum power dissipation of 1.25W
TPS28226DR Applications
There are a lot of Texas Instruments TPS28226DR gate drivers applications.
- Solar inverters
- DC/DC converters
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Portable computers
- General Purpose 3-Phase Inverter
- Welding
- Smart Phones
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Head-up and Head mounted displays
- Isolated Gate Driver Supplies
