TPS28226DRBTG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Weight | 24.012046mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | MOSFET Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 7.2V |
| Terminal Pitch | 0.65mm |
| Frequency | 2MHz |
| Pin Count | 8 |
| Max Output Current | 4mA |
| Operating Supply Voltage | 7.2V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 8V |
| Min Supply Voltage | 6.8V |
| Power Dissipation-Max | 2.58W |
| Element Configuration | Single |
| Power Dissipation | 2.58W |
| Current - Output | 6A |
| Rise Time | 10ns |
| Fall Time (Typ) | 10 ns |
| Turn-Off Delay Time | 14 ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Number of Drivers | 2 |
| High Side Driver | YES |
| Height | 880μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TPS28226DRBTG4 Overview
There is greater flexibility with the SOIC package.The packaging method is indicated by Tape and Reel.Gate drivers is configured wGate driversh 2 drivers.Its configuration is based on a total of 8 terminations.The device is mounted using Surface Mount.Mosfet driver is configured wMosfet driverh 8 pins when designing.The device is specifically designed to function with a supply voltage of 7.2V V.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.The maximum output current can amount to 4mA.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.A board with 8 component pins is available.The allowable maximum value of operating temperature is 125°C.Operating temperatures can be as low as -40°C.For operation, the supply voltage of 8V is the maximum value.For operation, 6.8V is the minimum supply voltage.As a result, the current it emits is 6A.Mosfet gate drivers is recommended that the operating supply voltage be set to 7.2V.By increasing the frequency of 2MHz, efficiency can be improved.
TPS28226DRBTG4 Features
Embedded in the Tape and Reel package
2 drivers
8 pins
TPS28226DRBTG4 Applications
There are a lot of Texas Instruments TPS28226DRBTG4 gate drivers applications.
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Video amplifiers
- Telecom switch mode power supplies
- Motor Control
- Refrigerator
- Isolated Gate Driver Supplies
- Active filtering
- Topologies
- Digitally controlled power supplies
- Solar inverters
