TPS2828DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 437mW |
| Technology | BICMOS |
| Voltage - Supply | 4V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Base Part Number | TPS2828 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Max Output Current | 2A |
| Nominal Supply Current | 15mA |
| Power Dissipation | 437mW |
| Output Current | 2A |
| Propagation Delay | 50 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Output Polarity | INVERTED |
| Rise / Fall Time (Typ) | 14ns 14ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Output Peak Current Limit-Nom | 2A |
| Supply Voltage1-Nom | 10V |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 4V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2828DBVR Overview
The SC-74A, SOT-753 package offers greater flexibility.A packaging method of Tape & Reel (TR) is indicated.It's mounted on the way to Surface Mount.In the absence of a 4V~14V supply voltage, it can demonstrate its superiority.N-Channel MOSFET is the gate type used for this design.This device is allowed to operate in a temperature range of -40°C~125°C TA.Inverting is used as its input type.It's configured with 5 terminations.Numerous related parts can be found under its base part number TPS2828.Mosfet driver is mounted using Surface Mount.As a result, it is configured with 5 pins when it is designed.With a supply voltage of 10V, it is designed to operate.In this case, BUFFER OR INVERTER BASED MOSFET DRIVER serves as the interface IC.In the maximum case, the output current can be limited to 2A.There are several useful electronic components in this subcategory of MOSFET Drivers.On the board, there are 5 component pins.For its basis, there are 1 outputs integrated.The output current can be set to 2A.Considering its maximum power dissipation, 437mW shows its maximum capacity to transfer and conduct power loss without overheating.
TPS2828DBVR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
5 pins
Maximum power dissipation of 437mW
TPS2828DBVR Applications
There are a lot of Texas Instruments TPS2828DBVR gate drivers applications.
- 3-Phase Motor Inverter Driver
- Line drivers
- Industrial Power Supplies
- Telecom switch mode power supplies
- DC-DC Converters
- RGB applications
- Welding
- Motor controllers
- Solar power supplies
- Commercial air-conditioning (CAC)
