TPS2828DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 437mW |
| Technology | BICMOS |
| Voltage - Supply | 4V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Base Part Number | TPS2828 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Voltage | 15.5V |
| Max Output Current | 2A |
| Nominal Supply Current | 100nA |
| Power Dissipation | 437mW |
| Output Current | 2A |
| Propagation Delay | 50 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ns |
| Max Output Voltage | 9.9V |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Output Polarity | INVERTED |
| Rise / Fall Time (Typ) | 14ns 14ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Output Peak Current Limit-Nom | 2A |
| Supply Voltage1-Nom | 10V |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 4V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2828DBVT Overview
Its SC-74A, SOT-753 package is adopted for higher flexibility.Cut Tape (CT) is the form of the package.In this case, gate drivers is mounted along the way of Surface Mount.WGate driversh a 4V~14V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.Gate type N-Channel MOSFET has been used in its design.This device allows temperatures in the range of -40°C~125°C TA.The input type is Inverting.There are 5 terminations to form the base of its configuration.Mosfet driver is possible to find various related parts under Mosfet drivers base part number TPS2828.In this case, Surface Mount indicates how the device is mounted.When the device is designed, it has 5 pins.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 10V.In this case, BUFFER OR INVERTER BASED MOSFET DRIVER serves as the interface IC.There is a maximum output current of 2A.Within this subcategory of MOSFET Drivers, there are several useful electronic components.On the board, there are 5 component pins.The basis of this model has 1 outputs integrated.The output current can be set to 2A.Using 437mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.As a result, a voltage of 15.5V is produced.Mosfet driver ic is recommended to keep the maximum output voltage at 9.9V.
TPS2828DBVT Features
Embedded in the Cut Tape (CT) package
Employing a gate type of N-Channel MOSFET
5 pins
Maximum power dissipation of 437mW
TPS2828DBVT Applications
There are a lot of Texas Instruments TPS2828DBVT gate drivers applications.
- Head-up and Head mounted displays
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Isolated Supplies for controller area network (CAN),
- UPS systems
- AC-DC Inverters
- Solar power supplies
- Welding
- Uninterruptible Power Supplies (UPS)
- Dual-Battery Systems
- Power factor correction (PFC) circuits
