TPS2829DBVRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 437mW |
| Technology | BICMOS |
| Voltage - Supply | 4V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Base Part Number | TPS2829 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Max Output Current | 2A |
| Nominal Supply Current | 100nA |
| Power Dissipation | 437mW |
| Output Current | 2A |
| Propagation Delay | 50 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 14ns 14ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 4V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS2829DBVRG4 Overview
For greater flexibility, its SC-74A, SOT-753 package is used.Gate drivers is packaged in the way of Tape & Reel (TR).Surface Mount is the way in which it is mounted.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4V~14V.There is a gate type of N-Channel MOSFET in this design.This device is allowed to operate in a temperature range of -40°C~125°C TA.Non-Inverting is used as the input type in this program.Initially, the configuration is composed of 5 terminations.The base part number TPS2829 refers to a number of related parts.The device is mounted with Surface Mount.A total of 5 pins are available on the device.In addition, it is specifically designed to operate with a supply voltage of 10V.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.2A is the maximum output current.There are several useful electronic components found in its subcategory of MOSFET Drivers.The board has 5 component pins.The basis of this system consists of 1 outputs.An output current of 2A is supported.Considering its maximum power dissipation, 437mW shows its maximum capacity to transfer and conduct power loss without overheating.
TPS2829DBVRG4 Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
5 pins
Maximum power dissipation of 437mW
TPS2829DBVRG4 Applications
There are a lot of Texas Instruments TPS2829DBVRG4 gate drivers applications.
- Motor Drives
- High current laser/LED systems
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Digitally controlled power supplies
- Isolated Supplies for Motor Control
- 3-Phase Motor Inverter Driver
- Telecom switch mode power supplies
- Industrial Motor Inverter - Power Tools, Robotics
- Solar power supplies
- Isolated Gate Driver Supplies
