TPS2829QDBVRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 437mW |
| Technology | BICMOS |
| Voltage - Supply | 4V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Base Part Number | TPS2829 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Max Output Current | 2A |
| Nominal Supply Current | 100nA |
| Power Dissipation | 437mW |
| Output Current | 2A |
| Propagation Delay | 50 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 14ns 14ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| High Side Voltage - Max (Bootstrap) | 34V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2829QDBVRQ1 Overview
A higher degree of flexibility is achieved by adopting its SC-74A, SOT-753 package.There is a package in the form of Tape & Reel (TR).Surface Mount is the way in which it is mounted.WGate driversh a 4V~14V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.This device is designed with a N-Channel MOSFET gate type.For this device, the temperature range is -40°C~150°C TJ.A type of Non-Inverting is used for input in this program.It's configured with 5 terminations.Many related parts can be found under its base part number TPS2829.The mount method is Surface Mount.When the device is designed, it has 5 pins.In order to operate, a voltage of 10V has to be applied.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.As a maximum, there is 2A limit to the output current.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The board has 5 component pins.Ideally, the high-side voltage should not exceed 34V.The basis of the model has 1 outputs integrated.An output current of 2A is supported.Based on its maximum power dissipation of 437mW, it is clear that it is capable of transferring and conducting power loss without overheating.Gate drivers in this series are included in the Automotive, AEC-Q100 series.
TPS2829QDBVRQ1 Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
5 pins
High-side voltage - Max (Bootstrap) of 34V
Maximum power dissipation of 437mW
Operating with the supply voltage of Automotive, AEC-Q100
TPS2829QDBVRQ1 Applications
There are a lot of Texas Instruments TPS2829QDBVRQ1 gate drivers applications.
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- A/D drivers
- Topologies
- Motor Drives
- Smart Phones
- High current laser/LED systems
- Motor Control
- Isolated Supplies for controller area network (CAN),
- Solar power supplies
- High power buffers
