TPS2830DRG4
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 6.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2830 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Power Supplies | 4.5/15V |
| Nominal Supply Current | 3mA |
| Input Type | Non-Inverting |
| Rise Time | 60ns |
| Fall Time (Typ) | 60 ns |
| Rise / Fall Time (Typ) | 50ns 50ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.08 µs |
| Output Peak Current Limit-Nom | 3.5A |
| Driven Configuration | High-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2.7A 2.4A |
| High Side Driver | YES |
| Turn Off Time | 0.13 µs |
| High Side Voltage - Max (Bootstrap) | 28V |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 133.412856mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 749mW |
| Voltage - Supply | 4.5V~15V |
TPS2830DRG4 Overview
There is greater flexibility with the 14-SOIC (0.154, 3.90mm Width) package.There is a package in the form of Tape & Reel (TR).Configuration is supported by 2 drivers.The device is mounted in the direction of Surface Mount.When the supply voltage is 4.5V~15V it is able to demonstrate its superiority.N-Channel MOSFET is the gate type used for this design.This device can operate at temperatures up to -40°C~125°C TJ.Non-Inverting is used as the input type in this program.The configuration is based on 14 terminations.You will find various related parts under the base part number TPS2830.Devices are mounted by Surface Mount.When the device is designed, it has 14 pins.The device is specifically designed to operate at 6.5V volts.Mosfet driver employs an interface chip called HALF BRIDGE BASED MOSFET DRIVER as Mosfet drivers interface chip.Several electronic components are included in its subcategory of MOSFET Drivers.14 pins are present on the component.Ideally, the high-side voltage should not exceed 28V.Considering its maximum power dissipation, 749mW shows its maximum capacity to transfer and conduct power loss without overheating.Due to its power supply of 4.5/15V, it provides an effective solution to power supply problems for a wide range of applications.
TPS2830DRG4 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 28V
Maximum power dissipation of 749mW
TPS2830DRG4 Applications
There are a lot of Texas Instruments TPS2830DRG4 gate drivers applications.
- Portable Media Players
- Motor controllers
- Power factor correction (PFC) circuits
- Isolated switch mode power supplies (SMPS)
- RGB applications
- Video amplifiers
- A/D drivers
- Isolated Gate Driver Supplies
- White Goods - Air Conditioner, Washing Machine,
- General Purpose 3-Phase Inverter
