TPS2830PWPRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | HTSSOP EP |
| Number of Pins | 14 |
| Weight | 58.003124mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | MOSFET Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 6.5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 14 |
| Number of Outputs | 2 |
| Max Output Current | 3.5A |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 4.5V |
| Power Dissipation-Max | 2.668W |
| Nominal Supply Current | 3mA |
| Power Dissipation | 2.668W |
| Current - Output | 2.4A |
| Propagation Delay | 130 ns |
| Turn On Delay Time | 130 ns |
| Rise Time | 60ns |
| Fall Time (Typ) | 60 ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Turn On Time | 0.08 µs |
| Output Peak Current Limit-Nom | 3.5A |
| High Side Driver | YES |
| Turn Off Time | 0.13 µs |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TPS2830PWPRG4 Overview
For greater flexibility, the HTSSOP EP package is adopted.Tape and Reel is the form of the package.Mosfet driver consists of 14 terminations as Mosfet drivers foundation.You mount it with Surface Mount.In the device, there are 14 pins.In addition, it is specifically designed to operate with a supply voltage of 6.5V.The interface IC is referred to as HALF BRIDGE BASED MOSFET DRIVER.As a maximum, there is 3.5A limit to the output current.There are several useful electronic components found in its subcategory of MOSFET Drivers.There are 14 component pins on the board.The basis of this system consists of 2 outputs.There is a maximum acceptable operating temperature of 125°C.Temperatures below -40°C are allowable as a minimum.The supply voltage of 15V is its maximum value for operation.In order for the device to operate, a supply voltage of 4.5V must be applied.A current of 2.4A is output by the device.
TPS2830PWPRG4 Features
Embedded in the Tape and Reel package
14 pins
TPS2830PWPRG4 Applications
There are a lot of Texas Instruments TPS2830PWPRG4 gate drivers applications.
- Automotive Applications
- Uninterruptible Power Supplies (UPS)
- Smart Phones
- Solar inverters
- Isolated Gate Driver Supplies
- Pulse transformer drivers
- Portable Media Players
- Welding
- High frequency line drivers
- A/D drivers
