TPS2831DR
| Parameters | |
|---|---|
| Power Dissipation | 749mW |
| Output Current | 2.4A |
| Propagation Delay | 130 ns |
| Input Type | Inverting |
| Turn On Delay Time | 130 ns |
| Rise Time | 60ns |
| Fall Time (Typ) | 60 ns |
| Rise / Fall Time (Typ) | 50ns 50ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.08 µs |
| Output Peak Current Limit-Nom | 3.5A |
| Driven Configuration | High-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2.7A 2.4A |
| High Side Driver | YES |
| Turn Off Time | 0.13 µs |
| High Side Voltage - Max (Bootstrap) | 28V |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 133.412856mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 749mW |
| Voltage - Supply | 4.5V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 6.5V |
| Base Part Number | TPS2831 |
| Pin Count | 14 |
| Max Output Current | 3.5mA |
| Operating Supply Voltage | 6.5V |
| Power Supplies | 4.5/15V |
| Nominal Supply Current | 3mA |
TPS2831DR Overview
For greater flexibility, its 14-SOIC (0.154, 3.90mm Width) package is used.Tape & Reel (TR) represents the packaging method.For its configuration, it incorporates 2 drivers.Surface Mount is the way in which it is mounted.WGate driversh a 4.5V~15V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.This device is designed with a N-Channel MOSFET gate type.Mosfet driver is possible to use this device at temperatures as low as -40°C~125°C TJ.Mosfet driver uses Inverting as Mosfet drivers input type.Mosfet driver consists of 14 terminations as Mosfet drivers foundation.Mosfet driver contains a variety of related parts under Mosfet drivers base part number TPS2831.Devices are mounted by Surface Mount.When the device is designed, it has 14 pins.Mosfet driver is designed specifically to run on 6.5V volts of power.HALF BRIDGE BASED MOSFET DRIVER is employed as its interface IC.There is a maximum output current of 3.5mA.There are several useful electronic components in this subcategory of MOSFET Drivers.The component has 14 pins.Maximum (Bootstrap) voltage is 28V.The output current supported by the device is 2.4A.The maximum power dissipation of 749mW shows its maximum capability to transfer and conduct power loss without overheating.With its power supplies of 4.5/15V, it solves the problems of power supply for a variety of applications.Mosfet gate drivers is recommended that 6.5V be set as the operating supply voltage.
TPS2831DR Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 28V
Maximum power dissipation of 749mW
TPS2831DR Applications
There are a lot of Texas Instruments TPS2831DR gate drivers applications.
- High-speed communications
- Isolated Supplies for controller area network (CAN),
- Commercial and agricultural vehicles (CAV)
- Digitally controlled power supplies
- Topologies
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Active filtering
- Welding
- Line drivers
- Motor Drives
