TPS2832D
| Parameters | |
|---|---|
| Input Type | Non-Inverting |
| Turn On Delay Time | 130 ns |
| Rise Time | 60ns |
| Fall Time (Typ) | 60 ns |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 50ns 50ns |
| Channel Type | Synchronous |
| Output Peak Current Limit-Nom | 3.5A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2.7A 2.4A |
| High Side Driver | YES |
| Turn Off Time | 0.13 µs |
| High Side Voltage - Max (Bootstrap) | 28V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 600mW |
| Voltage - Supply | 4.5V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 6.5V |
| Base Part Number | TPS2832 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 11.5V |
| Max Output Current | 3.5A |
| Operating Supply Voltage | 12V |
| Power Supplies | 4.5/13V |
| Nominal Supply Current | 3mA |
| Power Dissipation | 600mW |
| Output Current | 2.4A |
| Propagation Delay | 130 ns |
TPS2832D Overview
A higher degree of flexibility is achieved by adopting its 8-SOIC (0.154, 3.90mm Width) package.A packaging method of Tube is used.In the direction of Surface Mount, gate drivers is mounted.When the supply voltage is 4.5V~15V it is able to demonstrate its superiority.There is a gate type of N-Channel MOSFET in this design.Temperature range -40°C~125°C TJ is allowed for this device.This program uses the input type of Non-Inverting.The configuration is based on 8 terminations.Numerous related parts are available for its base part number TPS2832.In this case, Surface Mount indicates how the device is to be mounted.When the device is designed, it has 8 pins.Mosfet driver is designed specifically to run on 6.5V volts of power.In the maximum case, the output current can be limited to 3.5A.There are several useful electronic components found in its subcategory of MOSFET Drivers.The component has 8 pins.Mosfet driver is possible for the high-side voltage - Max (Bootstrap) to be as low as 28V.Based on its basis, it integrates 2 outputs.2.4A is the maximum output current supported by the device.Its maximum power dissipation of 600mW also demonstrates its maximum ability to transfer power without overheating.The power supply 4.5/13V of the product solves the power supply problem for a variety of applications.As a result, a voltage of 11.5V is produced.Mosfet gate drivers is recommended that the operating supply voltage be set to 12V volts.There is a STANDARD value associated with its input.
TPS2832D Features
Embedded in the Tube package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 28V
Maximum power dissipation of 600mW
TPS2832D Applications
There are a lot of Texas Instruments TPS2832D gate drivers applications.
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Topologies
- LCD/LCoS/DLP portable and embedded pico projectors
- Industrial Motor Inverter - Power Tools, Robotics
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Motor Controls
- Power factor correction (PFC) circuits
- Multicolor LED/laser displays
- Portable Navigation Devices
- AC-DC Inverters
