TPS2832DR
| Parameters | |
|---|---|
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 600mW |
| Voltage - Supply | 4.5V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 6.5V |
| Base Part Number | TPS2832 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 3.5A |
| Operating Supply Voltage | 12V |
| Power Supplies | 4.5/13V |
| Nominal Supply Current | 3mA |
| Power Dissipation | 600mW |
| Output Current | 2.4A |
| Propagation Delay | 130 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 130 ns |
| Rise Time | 60ns |
| Fall Time (Typ) | 60 ns |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 50ns 50ns |
| Channel Type | Synchronous |
| Output Peak Current Limit-Nom | 3.5A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2.7A 2.4A |
| High Side Driver | YES |
| Turn Off Time | 0.13 µs |
| High Side Voltage - Max (Bootstrap) | 28V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
TPS2832DR Overview
In order to increase flexibility, the package 8-SOIC (0.154, 3.90mm Width) is used.Gate drivers is package in Tape & Reel (TR) case.Ideally, it should be mounted in the direction of Surface Mount.In the absence of a 4.5V~15V supply voltage, its superiority can be demonstrated.A gate type of N-Channel MOSFET is used in its design.Temperature range -40°C~125°C TJ is allowed for this device.The input type is Non-Inverting.The configuration is based on 8 terminations.There are various parts that can be found under its base part number TPS2832.The device is mounted with Surface Mount.Mosfet driver is configured wMosfet driverh 8 pins when designing.A voltage of 6.5V is required for its operation.There is a maximum output current of 3.5A.Its subcategory of MOSFET Drivers contains various useful electronic components.A total of 8 pins are available for component connections.Maximum (Bootstrap) voltage is 28V.In terms of its basis, there are 2 outputs integrated.2.4A is the maximum output current supported by the device.This device has a maximum power dissipation of 600mW, indicating that it is capable of reducing power loss without overheating.Based on its power supplies of 4.5/13V, it solves the problem of power supply failure for a variety of applications.The operating supply voltage should be set at 12V.A STANDARD character describes its input.
TPS2832DR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 28V
Maximum power dissipation of 600mW
TPS2832DR Applications
There are a lot of Texas Instruments TPS2832DR gate drivers applications.
- A/D drivers
- Automotive Applications
- DC-DC Converters
- Pulse transformer drivers
- RGB applications
- Isolated Supplies for Motor Control
- Motor Control
- Industrial Power Supplies
- Active filtering
- Telecom switch mode power supplies
