TPS2835PWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 20 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 58.003124mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 2.668W |
| Voltage - Supply | 4.5V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 6.5V |
| Base Part Number | TPS2835 |
| Pin Count | 14 |
| Number of Outputs | 2 |
| Max Output Current | 3.5A |
| Operating Supply Voltage | 6.5V |
| Nominal Supply Current | 3mA |
| Power Dissipation | 2.668W |
| Output Current | 2.4A |
| Propagation Delay | 95 ns |
| Input Type | Inverting |
| Turn On Delay Time | 95 ns |
| Rise Time | 60ns |
| Fall Time (Typ) | 50 ns |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 50ns 40ns |
| Channel Type | Synchronous |
| Turn On Time | 0.08 µs |
| Output Peak Current Limit-Nom | 3.5A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2.7A 2.4A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 2V |
| Turn Off Time | 0.095 µs |
| High Side Voltage - Max (Bootstrap) | 28V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2835PWP Overview
Its 14-PowerTSSOP (0.173, 4.40mm Width) package provides greater flexibility.Tube represents the packaging method.There is a mounting bracket in the way of Surface Mount.In the absence of a 4.5V~15V supply voltage, its superiority can be demonstrated.A gate type of N-Channel MOSFET is used in its design.This device can operate at temperatures up to -40°C~125°C TJ.Inverting is used as the input type.Mosfet driver is based on 14 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number TPS2835.The device is mounted with Surface Mount.Mosfet driver is configured wMosfet driverh 14 pins when designing.The device is specifically designed to function with a supply voltage of 6.5V V.Mosfet driver is possible for the output current to be as low as 3.5A.This subcategory of MOSFET Drivers has a number of useful electronic components.On the board, there are 14 component pins.Mosfet driver is possible to set the high-side voltage - Max (Bootstrap) to 28V.The basis of this model has 2 outputs integrated.This device supports a current output of 2.4A at the output.Having the maximum power dissipation of 2.668W indicates its maximum capacity to conduct power losses without overheating.During the operation of the system, the voltage of the operating supply should be set to 6.5V.A STANDARD character describes its input.
TPS2835PWP Features
Embedded in the Tube package
Employing a gate type of N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 28V
Maximum power dissipation of 2.668W
TPS2835PWP Applications
There are a lot of Texas Instruments TPS2835PWP gate drivers applications.
- Motor Control
- Telecom switch mode power supplies
- Broadcast equipment
- Solar power supplies
- Commercial and agricultural vehicles (CAV)
- Motor controllers
- PCMCIA applications
- Uninterruptible Power Supplies (UPS)
- Automotive Applications
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
