TPS2835PWPR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 58.003124mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 2.668W |
| Voltage - Supply | 4.5V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 6.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2835 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Max Output Current | 3.5mA |
| Operating Supply Voltage | 6.5V |
| Nominal Supply Current | 3mA |
| Power Dissipation | 2.668W |
| Output Current | 2.4A |
| Propagation Delay | 95 ns |
| Input Type | Inverting |
| Rise Time | 50ns |
| Fall Time (Typ) | 40 ns |
| Rise / Fall Time (Typ) | 50ns 40ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.08 µs |
| Output Peak Current Limit-Nom | 3.5A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2.7A 2.4A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 2V |
| Turn Off Time | 0.095 µs |
| High Side Voltage - Max (Bootstrap) | 28V |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS2835PWPR Overview
For greater flexibility, the 14-PowerTSSOP (0.173, 4.40mm Width) package is adopted.A package of Tape & Reel (TR) has been used.Configuration is supported by 2 drivers.Surface Mount is the way in which it is mounted.WGate driversh a 4.5V~15V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.Gate drivers is designed wGate driversh a N-Channel MOSFET gate.Mosfet driver is possible to use this device at temperatures as low as -40°C~125°C TJ.Input type of Inverting is used.Mosfet driver is based on 14 terminations.Many related parts can be found under its base part number TPS2835.Surface Mount is the way it takes to mount the device.Devices have 14 pins available.In addition, it is specifically designed to operate with a supply voltage of 6.5V.The maximum output current can amount to 3.5mA.There are various useful electronic components in its subcategory MOSFET Drivers.The board has 14 component pins.There can be a voltage up to 28V on the high-side (Bootstrap).2.4A is the maximum output current supported by the device.Its maximum power dissipation of 2.668W shows its power loss capacity without overheating.Setting the operating supply voltage to 6.5V is recommended.
TPS2835PWPR Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 28V
Maximum power dissipation of 2.668W
TPS2835PWPR Applications
There are a lot of Texas Instruments TPS2835PWPR gate drivers applications.
- serial peripheral interface (SPI), I2C
- AC-DC Inverters
- Industrial Modules
- Isolated Supplies for Motor Control
- Active Clamp Flyback or Forward and Synchronous Rectifier
- DC-DC Converters
- Pulse transformer drivers
- Line drivers
- Isolated switch mode power supplies (SMPS)
- Video amplifiers
