TPS2836D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 600mW |
| Voltage - Supply | 4.5V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 6.5V |
| Base Part Number | TPS2836 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 11.5V |
| Max Output Current | 3.5A |
| Operating Supply Voltage | 6.5V |
| Power Supplies | 4.5/15V |
| Nominal Supply Current | 3mA |
| Power Dissipation | 600mW |
| Output Current | 2.4A |
| Propagation Delay | 95 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 95 ns |
| Rise Time | 60ns |
| Fall Time (Typ) | 50 ns |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 50ns 40ns |
| Channel Type | Synchronous |
| Output Peak Current Limit-Nom | 3.5A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2.7A 2.4A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 2V |
| Turn Off Time | 0.095 µs |
| High Side Voltage - Max (Bootstrap) | 28V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2836D Overview
Its 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.The packaging method is indicated by Tube.The device is mounted in the direction of Surface Mount.In the absence of a 4.5V~15V supply voltage, its superiority can be demonstrated.This gate type has a N-Channel MOSFET design.This device is allowed to operate in a temperature range of -40°C~125°C TJ.Non-Inverting is used as its input type.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.The base part number TPS2836 refers to a number of related parts.Mosfet driver is mounted using Surface Mount.Devices have 8 pins available.With a supply voltage of 6.5V, it is designed to operate.There is a maximum output current of 3.5A that can be achieved.Several electronic components are included in its subcategory of MOSFET Drivers.There are 8 component pins on the board.A high-side voltage can be set up to 28V (Bootstrap).The basis of this system consists of 2 outputs.The output current of this device can be set to 2.4A.600mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.With its power supplies of 4.5/15V, it solves the power supply problems for diverse applications.As a result, a voltage of 11.5V is produced.Setting the operating supply voltage to 6.5V is recommended.The input is characterized by STANDARD.
TPS2836D Features
Embedded in the Tube package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 28V
Maximum power dissipation of 600mW
TPS2836D Applications
There are a lot of Texas Instruments TPS2836D gate drivers applications.
- Isolated Gate Driver Supplies
- Isolated switch mode power supplies (SMPS)
- Broadcast equipment
- Multicolor LED/laser displays
- DC/DC converters
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- General Purpose 3-Phase Inverter
- Motor controllers
- Solar inverters
- UPS systems
