TPS2836DG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | MOSFET Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 6.5V |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 3.5A |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 4.5V |
| Power Dissipation-Max | 600mW |
| Nominal Supply Current | 3mA |
| Power Dissipation | 600mW |
| Current - Output | 2.4A |
| Propagation Delay | 95 ns |
| Turn On Delay Time | 95 ns |
| Rise Time | 60ns |
| Fall Time (Typ) | 50 ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Output Peak Current Limit-Nom | 3.5A |
| High Side Driver | YES |
| Turn Off Time | 0.095 µs |
| Height | 1.58mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TPS2836DG4 Overview
A higher degree of flexibility is achieved by adopting its SOIC package.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.You mount it with Surface Mount.In the device, there are 8 pins.A supply voltage of 6.5V is required for operation.The interface chip of the system is HALF BRIDGE BASED MOSFET DRIVER.There is a maximum output current of 3.5A that can be achieved.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The board has a total of 8 component pins.The basis of this system consists of 2 outputs.There is a maximum operating temperature of 125°C.There is a minimum operating temperature of -40°C.15V is its maximum operating voltage.Its minimum operating voltage is 4.5V.The current it outputs is 2.4A.
TPS2836DG4 Features
8 pins
TPS2836DG4 Applications
There are a lot of Texas Instruments TPS2836DG4 gate drivers applications.
- PCMCIA applications
- Motor controllers
- Isolated Supplies for Motor Control
- Industrial Power Supplies
- Isolated switch mode power supplies (SMPS)
- Dual-Battery Systems
- serial peripheral interface (SPI), I2C
- Isolated Supplies for controller area network (CAN),
- AC-DC Inverters
- Telecom switch mode power supplies
