TPS2836DRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | MOSFET Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 6.5V |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 3.5A |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 4.5V |
| Power Dissipation-Max | 600mW |
| Nominal Supply Current | 3mA |
| Power Dissipation | 600mW |
| Current - Output | 2.4A |
| Propagation Delay | 95 ns |
| Turn On Delay Time | 95 ns |
| Rise Time | 60ns |
| Fall Time (Typ) | 50 ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Output Peak Current Limit-Nom | 3.5A |
| High Side Driver | YES |
| Turn Off Time | 0.095 µs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TPS2836DRG4 Overview
The SOIC package offers greater flexibility.A packaging method of Tape and Reel is indicated.It's configured with 8 terminations.The mount method is Surface Mount.When designing, the device is configured with 8 pins.The device is specifically designed to function with a supply voltage of 6.5V V.Mosfet driver employs an interface chip called HALF BRIDGE BASED MOSFET DRIVER as Mosfet drivers interface chip.There is an output current limit of 3.5A for this device.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.There are 8 component pins on the board.Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.There is a maximum value of 125°C for the allowable operating temperature.Temperatures below -40°C are allowable as a minimum.The supply voltage of 15V is its maximum value for operation.This device operates at 4.5V as the minimum supply voltage.2.4A is the output current.
TPS2836DRG4 Features
Embedded in the Tape and Reel package
8 pins
TPS2836DRG4 Applications
There are a lot of Texas Instruments TPS2836DRG4 gate drivers applications.
- Commercial and agricultural vehicles (CAV)
- Dual-Battery Systems
- Topologies
- Telecom switch mode power supplies
- RGB applications
- 3-Phase Motor Inverter Driver
- Isolated Supplies for controller area network (CAN),
- Isolated Gate Driver Supplies
- Welding
- Portable Navigation Devices
