TPS2848PWPRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 2.739W |
| Voltage - Supply | 10V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2848 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Power Supplies | 10/15V |
| Input Type | Non-Inverting |
| Rise Time | 170ns |
| Fall Time (Typ) | 170 ns |
| Rise / Fall Time (Typ) | 65ns 65ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.11 µs |
| Output Peak Current Limit-Nom | 4.4A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 2V |
| High Side Voltage - Max (Bootstrap) | 29V |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
TPS2848PWPRG4 Overview
For greater flexibility, its 14-PowerTSSOP (0.173, 4.40mm Width) package is used.A package of Tape & Reel (TR) has been used.This device is equipped with 2 drivers for its configuration.The device is mounted in the direction of Surface Mount.When the supply voltage is set to 10V~15V, it can demonstrate its superiority.This gate type has a N-Channel MOSFET design.There is a temperature range for this device of -40°C~125°C TJ.A type of Non-Inverting is used for input in this program.14 terminations constitute its foundation.There are numerous related parts listed under its base part number TPS2848.Mosfet driver is mounted using Surface Mount.At the time of design, it is configured with 14 pins.Mosfet driver is designed specifically to run on 12V volts of power.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.There are 14 component pins on the board.A high-side voltage can be set up to 29V (Bootstrap).Using 2.739W as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.Based on its power supplies of 10/15V, it solves the problem of power supply failure for a variety of applications.
TPS2848PWPRG4 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 29V
Maximum power dissipation of 2.739W
TPS2848PWPRG4 Applications
There are a lot of Texas Instruments TPS2848PWPRG4 gate drivers applications.
- LCD/LCoS/DLP portable and embedded pico projectors
- Automotive Applications
- Industrial Modules
- High-voltage isolated DC-DC converters
- Isolated switch mode power supplies (SMPS)
- Welding
- UPS systems
- Isolated Supplies for Motor Control
- DC/DC converters
- Portable Navigation Devices
