TPS3103E12DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS3103E12 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Number of Channels | 1 |
| Max Supply Voltage | 3.3V |
| Min Supply Voltage | 400mV |
| Operating Supply Current | 1.2μA |
| Nominal Supply Current | 2μA |
| Power Dissipation | 437mW |
| Max Supply Current | 27μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1.2μA |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 65ms Minimum |
| Min Reset Threshold Voltage | 1.133V |
| Max Reset Threshold Voltage | 1.151V |
| Threshold Voltage | +1.142V |
| Undervoltage Threshold | 1.142V |
| Overvoltage Threshold | 1.151V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS3103E12DBVR Overview
As you can see, this power management is mounted through 6 terminals. A Cut Tape (CT) package is used to package the power management. Please find attached 1 functions for your reference in this IC power. It is possible to find on this power management a series of 1 channels. There are SOT-23-6 functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Packages are specified to have an average peak reflow temperature of 260. IC management conducts in a 1.2V-voltage supply. When a supply voltage of 1 is applied to the power ic, it conducts. The power management belongs to the Power Management Circuits subcategory. It has a total of 6 pins that are attached to IC management. This power management has 6 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 400mV. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 3.3V volts. The mounting type of the supervisors is Surface MountThis power management is the recommended temperature range for the supervisors: -40°C~85°C TJ. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. There is a supply current of 1.2μA for the power management. For similar manage ics search of the manufacturer, you can always refer to TPS3103E12, the base PMIC number. The power management can work with a maximum supply temperature of 27μA.
TPS3103E12DBVR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 400mV
1.2μA operating supply current
TPS3103E12DBVR Applications
There are a lot of Texas Instruments TPS3103E12DBVR Voltage Supervisors applications.
- Display equipment
- Power distribution systems of CCU
- External alarm
- Refrigeration
- Leakage protection
- Rechargeable batteries
- Detection of phase sequence
- Leakage current detection
- Analog circuit
- Smart meter
