TPS3103E15DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS3103E15 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Number of Channels | 1 |
| Max Supply Voltage | 3.3V |
| Min Supply Voltage | 400mV |
| Operating Supply Current | 1.2μA |
| Power Dissipation | 437mW |
| Max Supply Current | 27μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1.2μA |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 65ms Minimum |
| Min Reset Threshold Voltage | 1.423V |
| Max Reset Threshold Voltage | 1.445V |
| Threshold Voltage | +1.434V |
| Undervoltage Threshold | 1.434V |
| Overvoltage Threshold | 1.445V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS3103E15DBVR Overview
It is mounted through 6 terminals on the power management. Packaged in the form of a Cut Tape (CT), power management is easy to use. In this PMIC, you can find 1 functions for your reference. There are 1 channels available on this supervisor, and each channel has a different function. IC management is packaged as a SOT-23-6 package. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. The package peak reflow temperature is specified to be 260. When 1.5V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. A IC power such as this can be classified as a Power Management Circuits power management system. In total, it has 6 pins on IC management. 6 pins are on the supervisor. It is recommended that Vsup should not be less than 400mV for this IC power. The supply voltage (Vsup) should not exceed 3.3V volts in this IC power. The mounting type of the supervisors is Surface MountWe recommend setting the supervisors to -40°C~85°C TJ degrees. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. The power management's supply current is 1.2μA. A similar IC managements number of the manufacturer can always be found by using TPS3103E15, the base power ics number. At the most, voltage supervisor can work with a supply temperature of 27μA.
TPS3103E15DBVR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 400mV
1.2μA operating supply current
TPS3103E15DBVR Applications
There are a lot of Texas Instruments TPS3103E15DBVR Voltage Supervisors applications.
- Analog circuit
- Leakage current detection
- Satellite navigation
- Refrigeration
- Automotive permanent magnet synchronous motors
- Stable power system
- DC stabilized power supply module
- Personal computers
- Sensitive sensors
- Data storage applications
