TPS3103E15DBVTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS3103E15 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Number of Channels | 1 |
| Max Supply Voltage | 3.3V |
| Min Supply Voltage | 400mV |
| Operating Supply Current | 1.2μA |
| Power Dissipation | 437mW |
| Max Supply Current | 27μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1.2μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 65ms Minimum |
| Min Reset Threshold Voltage | 1.423V |
| Max Reset Threshold Voltage | 1.445V |
| Threshold Voltage | +1.434V |
| Undervoltage Threshold | 1.434V |
| Overvoltage Threshold | 1.445V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS3103E15DBVTG4 Overview
It is mounted through 6 terminals on the power management. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please find attached 1 functions for your reference in this IC power. This power management is made up of 1 channels which are available in a series format. To assist you, this PMIC includes SOT-23-6 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 1.5V. IC management is possible to find a succession of 1 voltages that have been checked. A IC power such as this can be classified as a Power Management Circuits power management system. It has a total of 6 pins that are attached to IC management. There are 6 pins on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 400mV, which is the minimum supply voltage that should be applied. In this PMIC, the maximum supply voltage (Vsup) should not exceed 3.3V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. Temperature setting for the supervisors should be -40°C~85°C TJ. The output voltage of this power managment ic during operation is Open Drain or Open Collector. There is a supply current of 1.2μA for the power management. You can always use TPS3103E15, the base supervisor number, to search for similar PMICs of the manufacturer. The maximum supply temperature that PMIC chip can work with is 27μA.
TPS3103E15DBVTG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 400mV
1.2μA operating supply current
TPS3103E15DBVTG4 Applications
There are a lot of Texas Instruments TPS3103E15DBVTG4 Voltage Supervisors applications.
- Fire equipment power monitoring system
- External alarm
- WiFi router
- Military electronics
- Magnetic resonance imaging
- Detection of phase sequence
- Digitally controlled LDO regulators circuit
- Insulation fault location system
- Important electronics for automotive safety
- Smart meter
