TPS3103H20DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS3103H20 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Number of Channels | 1 |
| Max Supply Voltage | 3.3V |
| Min Supply Voltage | 400mV |
| Operating Supply Current | 1.2μA |
| Power Dissipation | 437mW |
| Max Supply Current | 27μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1.2μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.84V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 65ms Minimum |
| Min Reset Threshold Voltage | 1.829V |
| Max Reset Threshold Voltage | 1.857V |
| Threshold Voltage | +1.84V |
| Undervoltage Threshold | 1.843V |
| Overvoltage Threshold | 1.857V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS3103H20DBVR Overview
It is mounted through 6 terminals on the power management. Packaged in the form of a Cut Tape (CT), power management is easy to use. For your reference, this IC power includes a list of 1 functions. It is possible to find on this power management a series of 1 channels. In this PMIC, you can find SOT-23-6 functions for your reference. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. The package peak reflow temperature is specified to be 260. IC management conducts at a voltage of 2V. A supply voltage of 1 is used to conduct the PMIC chip. This power ic can be sub-categorized as Power Management Circuits. In total, it has 6 pins on IC management. 6 pins are present on the power management system. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 400mV. The supply voltage (Vsup) should not exceed 3.3V volts in this IC power. Power management recommends the Surface Mount mounting type. Temperature setting for the supervisors should be -40°C~85°C TJ. During operation, this power management system outputs Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 1.2μA. You can always use TPS3103H20, the base supervisor number, to search for similar PMICs of the manufacturer. The maximum supply temperature voltage supervisor can handle is 27μA.
TPS3103H20DBVR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 400mV
1.2μA operating supply current
TPS3103H20DBVR Applications
There are a lot of Texas Instruments TPS3103H20DBVR Voltage Supervisors applications.
- Insulation fault location system
- Cloud computing
- Utility meter
- Military communications
- Automotive permanent magnet synchronous motors
- Refrigeration
- Data storage applications
- Unattended substation automation
- Personal computers
- Sensitive sensors
