TPS3103H20DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS3103H20 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Number of Channels | 1 |
| Max Supply Voltage | 3.3V |
| Min Supply Voltage | 400mV |
| Operating Supply Current | 1.2μA |
| Power Dissipation | 437mW |
| Max Supply Current | 27μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1.2μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.84V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 65ms Minimum |
| Min Reset Threshold Voltage | 1.829V |
| Max Reset Threshold Voltage | 1.857V |
| Threshold Voltage | +1.84V |
| Undervoltage Threshold | 1.843V |
| Overvoltage Threshold | 1.857V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS3103H20DBVT Overview
As you can see, this power management is mounted through 6 terminals. Power management is packaged in a Tape & Reel (TR) way. Please find attached 1 functions for your reference in this IC power. On this supervisor, there is a series of 1 channels that can be found. Please find attached SOT-23-6 functions for your reference in this IC power. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. As specified in the package specification, the peak reflow temperature of the package is set at 260. IC management conducts at a voltage of 2V. In a 1 supply voltage, the PMIC chip conducts. The power management system can be categorized as a Power Management Circuits chip. In total, the power management has 6 pins in it. This power management system has 6 pins. A voltage (Vsup) that doesn't fall below 400mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. This IC power should be powered by no more than 3.3V volts of supply voltage (Vsup). Surface Mount mounting is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TJ. Power management has an output of Open Drain or Open Collector during operation. The supply current of the power management is 1.2μA. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3103H20, which is the base power ics number. At most, voltage supervisor can operate at a supply temperature of 27μA.
TPS3103H20DBVT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 400mV
1.2μA operating supply current
TPS3103H20DBVT Applications
There are a lot of Texas Instruments TPS3103H20DBVT Voltage Supervisors applications.
- Functional modules
- Analog circuit
- External alarm
- Electric heating appliances
- Smartphones
- DVR
- Battery cars
- Important electronics for automotive protection
- Fire equipment power monitoring system
- Detection of phase loss
