TPS3103H20DBVTG4
| Parameters | |
|---|---|
| Package / Case | SOT-23 |
| Surface Mount | YES |
| Number of Pins | 6 |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2V |
| Terminal Pitch | 0.95mm |
| Pin Count | 6 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 3.3V |
| Min Supply Voltage | 400mV |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Power Dissipation-Max | 437mW |
| Operating Supply Current | 1.2μA |
| Power Dissipation | 437mW |
| Max Supply Current | 27μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1.2μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 1.843V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 65 ms |
| Min Reset Threshold Voltage | 1.829V |
| Max Reset Threshold Voltage | 1.857V |
| Threshold Voltage | +1.84V |
| Undervoltage Threshold | 1.843V |
| Overvoltage Threshold | 1.857V |
| Height | 1.15mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TPS3103H20DBVTG4 Overview
There are 6 terminals on this power management that allow it to be mounted. In this PMIC, you can find 1 functions for your reference. There are 1 channels on this power managment ic that can be found in a series. Please refer to power management for SOT-23 functions. The package peak reflow temperature is specified to be 260. When a supply voltage of 2V is applied to the power ic, it conducts. During operation, the power ic is supplied with a voltage of 1. There is a subcategory of this power ic known as Power Management Circuits. There are a total of 6 pins on power management. 6 pins are on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 400mV volts. There should be no more than 3.3V volts of maximum supply voltage (Vsup) in this power management. The supply current of the power management is 1.2μA. It also contains ICs of other kinds, such as POWER SUPPLY SUPPORT CIRCUIT, which are included in the power management. The power management can work with a maximum supply temperature of 27μA.
TPS3103H20DBVTG4 Features
Minimum supply voltage of 400mV
1.2μA operating supply current
TPS3103H20DBVTG4 Applications
There are a lot of Texas Instruments TPS3103H20DBVTG4 Voltage Supervisors applications.
- FPGA design
- Leakage protection
- Efficient information transmission
- Low voltage/high power - AI, GPU
- Important electronics for automotive safety
- Battery cars
- WiFi router
- Power communication system
- Automotive permanent magnet synchronous motors
- Sensitive sensors
