TPS3103K33DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS3103K33 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Max Output Current | 5mA |
| Number of Channels | 1 |
| Max Supply Voltage | 3.3V |
| Min Supply Voltage | 400mV |
| Operating Supply Current | 1.2μA |
| Nominal Supply Current | 2μA |
| Power Dissipation | 437mW |
| Max Supply Current | 27μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1.2μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 65ms Minimum |
| Min Reset Threshold Voltage | 2.919V |
| Max Reset Threshold Voltage | 2.963V |
| Threshold Voltage | +2.941V |
| Undervoltage Threshold | 2.941V |
| Overvoltage Threshold | 2.963V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS3103K33DBVT Overview
As you can see, this power management is mounted through 6 terminals. A Tape & Reel (TR) package is used to package the power management. Please refer to this PMIC for 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this PMIC, you can find SOT-23-6 functions for your reference. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. There is a specification for the peak reflow temperature of the package to be 260. When a supply voltage of 3.3V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. This power ic can be sub-categorized as Power Management Circuits. A total of 6 pins are located on this power management. There are 6 pins on the supervisor. Supply voltage (Vsup) should be at least 400mV for this power management. There should be no more than 3.3V volts of supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TJ. During operation, this power management system outputs Open Drain or Open Collector. The supply current of the power management is 1.2μA. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3103K33, which is the base power ics number. A maximum supply temperature of 27μA can be used with this power management.
TPS3103K33DBVT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 400mV
1.2μA operating supply current
TPS3103K33DBVT Applications
There are a lot of Texas Instruments TPS3103K33DBVT Voltage Supervisors applications.
- Solar power charger
- Personal computers
- WiFi router
- DSP
- Urban rail transit weak current power monitoring
- Electrical fire monitoring system
- Medical-specific isolation transformer
- Smartphones
- Display equipment
- Important electronics for automotive safety
