TPS3103K33DBVTG4
| Parameters | |
|---|---|
| Reset Timeout | 65ms Minimum |
| Min Reset Threshold Voltage | 2.919V |
| Max Reset Threshold Voltage | 2.963V |
| Threshold Voltage | +2.941V |
| Undervoltage Threshold | 2.941V |
| Overvoltage Threshold | 2.963V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS3103K33 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Number of Channels | 1 |
| Max Supply Voltage | 3.3V |
| Min Supply Voltage | 400mV |
| Operating Supply Current | 1.2μA |
| Power Dissipation | 437mW |
| Max Supply Current | 27μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1.2μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
TPS3103K33DBVTG4 Overview
This voltage supervisor has a total of 6 mounting terminals that can be used for mounting. Packaging is in the form of a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 1 channels that can be found. As a reference, this IC power includes SOT-23-6 functions for your convenience. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. There is a specification for the peak reflow temperature of the package to be 260. IC management conducts in a 3.3V-voltage supply. IC management conducts in a 1-voltage supply. This power ic can be sub-categorized as Power Management Circuits. In total, IC powers are 6 pins on the board. 6 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 400mV. In this PMIC, the maximum supply voltage (Vsup) should not exceed 3.3V volts. In this case, Surface Mount is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TJ. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. As far as the supply current of the power management is concerned, it is 1.2μA. A similar IC managements number of the manufacturer can always be found by using TPS3103K33, the base power ics number. Voltage supervisor can work with a supply temperature of 27μA at the most.
TPS3103K33DBVTG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 400mV
1.2μA operating supply current
TPS3103K33DBVTG4 Applications
There are a lot of Texas Instruments TPS3103K33DBVTG4 Voltage Supervisors applications.
- FPGA design
- Detection of phase loss
- Dash board
- Electric heating appliances
- Refrigeration
- Microcontroller system
- Multi-voltage system
- Important electronics for automotive safety
- Embedded computing
- Automotive permanent magnet synchronous motors
