TPS3106E09DBVRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 0.9V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS3106E09 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Number of Channels | 1 |
| Max Supply Voltage | 3.3V |
| Min Supply Voltage | 400mV |
| Operating Supply Current | 1.2μA |
| Power Dissipation | 437mW |
| Max Supply Current | 27μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1.2μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 0.86V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 65ms Minimum |
| Min Reset Threshold Voltage | 854mV |
| Max Reset Threshold Voltage | 866mV |
| Threshold Voltage | +0.86V |
| Undervoltage Threshold | 860mV |
| Overvoltage Threshold | 866mV |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS3106E09DBVRG4 Overview
This power management consists of 6 mounting terminals on which it can be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. In this PMIC, you can find 1 functions for your reference. Depending on the power managment ic you are looking at, you can find a total of 1 channels. IC management is packaged as a SOT-23-6 package. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. According to the specification, the package's peak reflow temperature is specified to be 260. The supervisor is always powered by a 0.9V volt supply. IC management is possible to find a succession of 1 voltages that have been checked. A IC power such as this can be classified as a Power Management Circuits power management system. In total, the power management has 6 pins in it. This power management has 6 pins. Supply voltage (Vsup) should be at least 400mV for this power management. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 3.3V volts. Power management recommends the Surface Mount mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TJ. During operation, this power management system outputs Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 1.2μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using TPS3106E09, the base power ics number. A maximum supply temperature of 27μA can be used.
TPS3106E09DBVRG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 400mV
1.2μA operating supply current
TPS3106E09DBVRG4 Applications
There are a lot of Texas Instruments TPS3106E09DBVRG4 Voltage Supervisors applications.
- Magnetic resonance imaging
- Microprocessor system
- Utility meter
- Network equipment
- Detection of phase imbalance
- Automotive power systems
- Multi-voltage system
- Solar power charger
- Efficient information transmission
- Power communication system
