TPS3106E09DBVT
| Parameters | |
|---|---|
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 0.9V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS3106E09 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Number of Channels | 1 |
| Max Supply Voltage | 3.3V |
| Min Supply Voltage | 400mV |
| Operating Supply Current | 1.2μA |
| Power Dissipation | 437mW |
| Max Supply Current | 27μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1.2μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 0.86V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 65ms Minimum |
| Min Reset Threshold Voltage | 854mV |
| Max Reset Threshold Voltage | 866mV |
| Threshold Voltage | +0.86V |
| Undervoltage Threshold | 860mV |
| Overvoltage Threshold | 866mV |
| Height | 1.45mm |
| Length | 2.9mm |
TPS3106E09DBVT Overview
This voltage supervisor has a total of 6 mounting terminals that can be used for mounting. Packaged in the form of a Cut Tape (CT), power management is easy to use. In this IC power you will find 1 functions for you to refer to. There are 1 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of SOT-23-6 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. In a 0.9V supply voltage, the power management conducts. Power management conducts at a voltage of 1. Power Management Circuits is a subcategory of this PMIC chip. Power management has a total of 6 pins. Pin count of the power management is 6. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 400mV volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 3.3V volts. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TJ. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 1.2μA is the recommended value. To find similar IC managements from the manufacturer, you can always search by TPS3106E09. The maximum supply temperature that PMIC chip can work with is 27μA.
TPS3106E09DBVT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 400mV
1.2μA operating supply current
TPS3106E09DBVT Applications
There are a lot of Texas Instruments TPS3106E09DBVT Voltage Supervisors applications.
- Medical-specific insulation monitor
- Important electronics for automotive safety
- Radar
- Detection of phase sequence
- Important electronics for automotive protection
- Military communications
- Detection of phase imbalance
- Power distribution systems of operating room
- Utility meter
- Automotive permanent magnet synchronous motors
