TPS3106E09DBVTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 0.9V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS3106E09 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Number of Channels | 1 |
| Max Supply Voltage | 3.3V |
| Min Supply Voltage | 400mV |
| Operating Supply Current | 1.2μA |
| Power Dissipation | 437mW |
| Max Supply Current | 27μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1.2μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 0.86V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 65ms Minimum |
| Min Reset Threshold Voltage | 854mV |
| Max Reset Threshold Voltage | 866mV |
| Threshold Voltage | +0.86V |
| Undervoltage Threshold | 860mV |
| Overvoltage Threshold | 866mV |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS3106E09DBVTG4 Overview
Power management is mounted through 6 terminals. It is packaged with Tape & Reel (TR). Power management is possible to find a series of 1 functions. It is possible to find on this power management a series of 1 channels. As a reference, this IC power includes SOT-23-6 functions for your convenience. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. When 0.9V is applied to the power ic, it conducts. During operation, the power ic is supplied with a voltage of 1. It is possible to subcategorize this power ic as a Power Management Circuits chip. A total of 6 pins are located on this power management. There are 6 pins on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 400mV. The maximum supply voltage (Vsup) in this PMIC should not exceed 3.3V volts. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TJ. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. The supervisor's supply current is specified to 1.2μA. You can always use TPS3106E09, the base supervisor number, to search for similar PMICs of the manufacturer. At most, voltage supervisor can operate at a supply temperature of 27μA.
TPS3106E09DBVTG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 400mV
1.2μA operating supply current
TPS3106E09DBVTG4 Applications
There are a lot of Texas Instruments TPS3106E09DBVTG4 Voltage Supervisors applications.
- Medical-specific isolation transformer
- Power distribution systems of infant care room
- Smartphones
- Household appliances
- Military communications
- Telecommunications equipment
- Power distribution systems of ICU
- Functional modules
- Medical-specific insulation monitor
- Leakage protection
