TPS3106E16DBVTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.6V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS3106E16 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Number of Channels | 1 |
| Max Supply Voltage | 3.3V |
| Min Supply Voltage | 400mV |
| Operating Supply Current | 1.2μA |
| Power Dissipation | 437mW |
| Max Supply Current | 27μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1.2μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 65ms Minimum |
| Min Reset Threshold Voltage | 1.512V |
| Max Reset Threshold Voltage | 1.534V |
| Threshold Voltage | +1.521V |
| Undervoltage Threshold | 1.521V |
| Overvoltage Threshold | 1.534V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS3106E16DBVTG4 Overview
This power management consists of 6 mounting terminals on which it can be mounted. This power ic is packaged in a way that looks like a Tape & Reel (TR). Power management is possible to find a series of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. IC management is packaged as a SOT-23-6 package. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. When a supply voltage of 1.6V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. There is a subcategory called Power Management Circuits for this power management. A total of 6 pins are located on this power management. There are 6 pins on the supervisor. It is recommended that Vsup should not be less than 400mV for this IC power. Voltage (Vsup) shouldn't exceed 3.3V volts in this PMIC. The recommended mounting type for IC management is Surface Mount. You should set the supervisor's temperature during -40°C~85°C TJ . While in operation, this supervisor has a voltage output of Open Drain or Open Collector. The supervisor's supply current is specified to 1.2μA. It is always advisable to use TPS3106E16, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature is 27μA.
TPS3106E16DBVTG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 400mV
1.2μA operating supply current
TPS3106E16DBVTG4 Applications
There are a lot of Texas Instruments TPS3106E16DBVTG4 Voltage Supervisors applications.
- Household appliances
- DC stabilized power supply module
- Medical-specific insulation monitor
- Radio
- Dash board
- Power distribution systems of infant care room
- Electric heating appliances
- Rechargeable batteries
- Utility meter
- Efficient information transmission
