TPS3106K33DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS3106K33 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Power Supplies | 0.4/3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 900mV |
| Operating Supply Current | 1.2μA |
| Nominal Supply Current | 2μA |
| Power Dissipation | 437mW |
| Max Supply Current | 27μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1.2μA |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 65ms Minimum |
| Min Reset Threshold Voltage | 2.919V |
| Max Reset Threshold Voltage | 2.963V |
| Threshold Voltage | +2.941V |
| Undervoltage Threshold | 2.941V |
| Overvoltage Threshold | 2.963V |
| Max Junction Temperature (Tj) | 125°C |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS3106K33DBVR Description
The TPS310x and TPS311x families of supervisory circuits provide circuit initialization and timing supervision, primarily for DSP and processor-based systems. During power-on, RESET is asserted low when the supply voltage (VDD) becomes higher than 0.4 V. Thereafter, the supervisory circuit monitors VDD and keeps the RESET output low as long as VDD remains below the threshold voltage (VIT¨C ). To ensure proper system reset after VDD surpasses the threshold voltage, an internal timer delays the transition of the RESET signal from low to high for the specified time. When VDD drops below VIT¨C, the output transitions low again.
TPS3106K33DBVR Features
Precision Supply Voltage Supervision Range:
0.9 V, 1.2 V, 1.5 V, 1.6 V, 2 V, and 3.3 V
High Trip-Point Accuracy: 0.75%
Supply Current of 1.2 |ìA (Typical)
RESET Defined With Input Voltages as Low as 0.4 V
Power-On Reset Generator With a Delay Time of 130 ms
Push/Pull or Open-Drain RESET Outputs
Package Temperature Range: ¨C40??C to 125??C
TPS3106K33DBVR Applications
Applications Using Low-Power DSPs,
Microcontrollers or Microprocessors
Portable and Battery-Powered Equipment
Intelligent Instruments
Wireless Communication Systems
Industrial Equipment
Notebook and Desktop Computers
