TPS3110E12DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS3110E12 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 6 |
| Number of Channels | 1 |
| Max Supply Voltage | 3.3V |
| Min Supply Voltage | 400mV |
| Operating Supply Current | 1.2μA |
| Power Dissipation | 437mW |
| Max Supply Current | 27μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1.2μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 65ms Minimum |
| Min Reset Threshold Voltage | 1.133V |
| Max Reset Threshold Voltage | 1.151V |
| Threshold Voltage | 1.142 |
| Undervoltage Threshold | 1.142V |
| Overvoltage Threshold | 1.151V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS3110E12DBVR Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 6 in total. This power ic is packaged in a way that looks like a Cut Tape (CT). The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. Please refer to power management for SOT-23-6 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. During the reflow process, a peak temperature of 260 is specified for the package. Manage ics operate at 1.2V supply voltages. Power ics operate at 1 supply voltages. The power management system can be categorized as a Power Management Circuits chip. In total, the power management has 6 pins in it. There are 6 pins on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 400mV volts. The maximum supply voltage (Vsup) is not to exceed 3.3V volts in this IC management. The mounting type of the supervisors is Surface MountIt is recommended that the supervisor be set to this temperature: -40°C~85°C TJ. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 1.2μA. It is always advisable to use TPS3110E12, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 27μA can be used with this power management.
TPS3110E12DBVR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 400mV
1.2μA operating supply current
TPS3110E12DBVR Applications
There are a lot of Texas Instruments TPS3110E12DBVR Voltage Supervisors applications.
- Power distribution systems of ICU
- Set top box
- Digitally controlled LDO regulators circuit
- Electric heating appliances
- Sensitive sensors
- Network equipment
- Consumer electronics
- Important electronics for automotive protection
- Electrical fire monitoring system
- Electronics installed in the vehicle
