TPS3110E15DBVTG4
| Parameters | |
|---|---|
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.95mm |
| Pin Count | 6 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 3.3V |
| Min Supply Voltage | 400mV |
| Analog IC - Other Type | POWER SUPPLY MANAGEMENT CIRCUIT |
| Power Dissipation-Max | 437mW |
| Operating Supply Current | 1.2μA |
| Power Dissipation | 437mW |
| Max Supply Current | 27μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1.2μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 1.434V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 65 ms |
| Min Reset Threshold Voltage | 1.423V |
| Max Reset Threshold Voltage | 1.445V |
| Undervoltage Threshold | 1.434V |
| Overvoltage Threshold | 1.445V |
| Height | 1.15mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Package / Case | SOT-23 |
| Surface Mount | YES |
| Number of Pins | 6 |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
TPS3110E15DBVTG4 Overview
A total of 6 terminals are used to mount this power management. To assist you, this IC power includes 1 functions. A series of 1 channels can be found on this supervisor. There are SOT-23 functions included in this PMIC so that you can refer to them. According to the specification, the package's peak reflow temperature is specified to be 260. When a supply voltage of 1.5V is applied to the power ic, it conducts. IC management is possible to find a succession of 1 voltages that have been checked. A IC power such as this can be classified as a Power Management Circuits power management system. There are a total of 6 pins on power management. The pins of the power management system count 6. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 400mV volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 3.3V volts. It is estimated that the voltage supervisor's supply current is 1.2μA. There are other types of IC included in the power managment ic, such as types POWER SUPPLY MANAGEMENT CIRCUIT. Voltage supervisor can work with a supply temperature of 27μA at the most.
TPS3110E15DBVTG4 Features
Minimum supply voltage of 400mV
1.2μA operating supply current
TPS3110E15DBVTG4 Applications
There are a lot of Texas Instruments TPS3110E15DBVTG4 Voltage Supervisors applications.
- Electrical fire monitoring system
- Kitchen appliances
- DSP
- Medical-specific insulation monitor
- Data storage applications
- DVR
- Sensitive sensors
- Telecommunications equipment
- Digitally controlled LDO regulators circuit
- WiFi router
